News Center

How to block a personnel positioning card at a chemical plant _ Methods for blocking personnel positioning cards


Category:

Author:

A Fa

Source:

admin

Release Date:

2025-05-07

Blocking personnel‑location cards at chemical plants constitutes a serious violation and a hazardous practice, potentially leading to major safety incidents and legal liabilities. Any attempt to interfere with or block such location cards is strictly prohibited.   The following explains the reasons from the perspectives of security compliance, technical principles, and legal risks, and provides lawful and compliant alternatives and recommendations:


I. The Nature and Risks of Blocking Positioning Cards

  1. Technical Principle
    • Chemical Plant Personnel Location Card Through GPS/Beidou satellite positioning, Bluetooth beacons, UWB ultra-wideband, LoRa wireless communication Once the technology enables location reporting, signal transmission relies on specific frequency bands, such as 2.4 GHz Bluetooth or the UWB 6.5 GHz band.
    • Shielding measures typically involve interfering with or blocking signals in these frequency bands; however, the complex environment of chemical plants can cause such shielding to trigger a cascade of unintended consequences:
      • Positioning system down All positioning cards have failed, causing the monitoring center to be unable to obtain the real-time location of personnel.
      • Uncontrolled safety risks : In the event of leaks, fires, or other emergencies, rescue personnel are unable to locate trapped individuals, resulting in missed opportunities for timely rescue.
      • Compliance failure : Violates the requirements of laws and regulations such as the Work Safety Law and the Regulations on the Safety Management of Hazardous Chemicals.
  2. Legal consequences
    • Administrative penalty : Enterprises may face production shutdowns for rectification and hefty fines (e.g., under the Work Safety Law, the maximum fine can reach 100 million yuan ).
    • Criminal liability : If personnel injuries or fatalities result from the shielding of positioning cards, the persons responsible may be found to have committed Crime of Major Responsibility Accident , with a maximum sentence of 7 years of fixed-term imprisonment 。
    • Civil compensation : The victims’ families may file lawsuits against the company and the persons held liable, seeking substantial monetary compensation.

II. Common “Blocking” Practices and an Analysis of Their Infeasibility

Blocking methods

Reason for infeasibility

Metal Shielding Cover/Faraday Cage

It requires complete encapsulation of the positioning card, rendering the wearer immobile; moreover, the complex environment of chemical plants makes comprehensive shielding impractical.

Signal jammer

It is an illegal radio device; its interference frequency band may disrupt other safety systems, such as walkie-talkies and alarm systems, and it is easily detectable by regulatory authorities.

Remove or damage the positioning card.

Location tags are typically integrated with safety helmets, employee badges, and other items; once tampered with, they fail security checks, and the backend system immediately triggers an alarm.

Spoofing signals to deceive base stations

The technical barriers are high, requiring specialized equipment and incurring substantial costs; base station densification in chemical plants is tightly controlled, making it unattainable through conventional methods.

III. Lawful and Compliant Alternatives

  1. Apply for Temporary Permissions (Emergency Situation)
    • If temporary shielding of the positioning is required due to special operations (such as maintenance in confined spaces), it shall be carried out through… Enterprise Security Management System Submit the application; upon approval, the safety officer will manually switch to “Offline Mode” and configure… Automatic alarm upon timeout 。
    • Example Workflow :
      1. The job supervisor shall submit the “Special Work Approval Form,” specifying the reason for shielding, the duration, and the affected area.
      2. After review by the Security Department, the corresponding positioning card will be switched to “Offline Mode” via the management backend.
      3. During operations, the safety officer uses backup systems—such as infrared thermal imaging—to assist with monitoring.
      4. Upon completion of the work, immediately restore the positioning function and submit the “Safety Review Report.”
  2. Optimize the positioning system design
    • Redundant design : Adopt Multi-mode positioning technology (For example, GPS + Bluetooth + UWB), automatically switches to another mode when a single signal is interrupted.
    • Low-power design : Extend the battery life of the positioning card and reduce “false blocking” caused by insufficient power.
    • Tamper alarm : The positioning card features a built-in accelerometer; in the event of forceful removal, it triggers an audible and visual alarm and uploads the alarm information.
  3. Employee Training and Communication
    • Case-based education : Strengthen safety awareness through real-world accident cases (e.g., a chemical plant where the use of a shielded positioning card resulted in three fatalities).
    • Anonymous Feedback Channel Employees can anonymously report issues related to the positioning card—such as signal blind spots or discomfort when worn—through the company’s security app, and the technical team will work to optimize the solution.

IV. Corporate Response Strategies

  1. Technological upgrade
    • Deployment AI Behavior Analysis System , through Trajectory Analysis and Recognition Abnormal behaviors (such as personnel remaining stationary for an extended period) automatically trigger verification.
    • Introduction 5G private network , enhancing positioning accuracy and anti-interference capability while reducing signal blind spots.
  1. System improvement
    • Incorporate the usage of positioning cards into Employee Safety Performance Evaluation , Violations involving blocking directly affect bonuses and promotions.
    • Establish Blacklist mechanism , conduct safety retraining or reassign employees who have repeatedly violated policies to different roles.
  2. Emergency Response Plan
    • Develop the “Emergency Response Plan for Positioning System Failures,” clearly defining procedures to be followed when a signal‑jamming incident occurs. Tiered Response Procedure :
      • Level 1 Response (Single Card Failure): The team leader shall verify and restore the issue within 10 minutes.
      • Level 2 Response (Regional Failure): Within 30 minutes, the Security Department shall activate backup monitoring measures.
      • Level 3 Response (Plant-Wide Failure): Immediately initiate emergency evacuation and report to the regulatory authorities.

V. Conclusion

The personnel positioning card in chemical plants is a core tool for ensuring production safety; any attempt to block or interfere with it is a disregard for human life. Enterprises should, through… Technological upgrades, institutional improvements, and employee training Adopt a three-pronged approach to ensure the positioning system operates with 100% reliability. If employees encounter difficulties in using the positioning cards, they should report these issues through proper channels rather than resorting to unauthorized methods. There are no small matters when it comes to safety; compliance is the bottom line. 。