News Center

Hangfei Optoelectronics Shares: Deployment Process and Pitfall‑Avoidance Guide for Personnel Positioning Systems


Category:

Author:

Aviation and Optical-Electronic Technology

Source:

www.hangfeigd.com

Release Date:

2026-01-23

   As the demand for industrial safety and intelligent management continues to grow, personnel positioning systems have become a critical technological backbone in high-risk work zones, large industrial facilities, tunnel projects, and other sectors. However, many enterprises encounter challenges during deployment—stemming from unclear processes and insufficient attention to detail—that prevent the system from delivering the expected results after implementation. As a provider of cutting-edge, intelligent industrial safety solutions, Hangfei Optoelectronics has amassed extensive frontline experience. Today, we’ll walk through the key steps involved in planning and deploying a personnel positioning system, while identifying common pitfalls to help you ensure a smooth rollout.

  I. Precise Demand Analysis: It’s About More Than Just “Knowing Where People Are”

  Many projects fall into a common misconception right from the start—assuming that personnel positioning simply means recording locations. In reality, a positioning system must be deeply integrated with enterprise safety management, production scheduling, emergency response, and other critical functions.

  Key Process:

  •   Clearly define the core objective: Should the focus be on safety alerts (e.g., stationary status, boundary breaches), or on work scheduling and time‑keeping?
  •   Determine the accuracy requirements: area-level (room/workshop), meter-level (near specific equipment), or centimeter-level (at high-risk work locations)?
  •   Streamline business processes: Which stages require the integration of location data? How can these be seamlessly interconnected with existing systems, such as MES, access control, and video surveillance?

  Pitfall Guide:

  •   Avoid a one-size-fits-all approach in pursuit of high precision. Higher precision entails greater hardware costs and increased deployment complexity. Instead, set precision levels based on regional needs to achieve optimal cost-effectiveness.
  •   Avoid letting the IT department alone dictate requirements. It is essential to involve multiple departments—such as security, operations, and facilities—to ensure the system aligns with real-world business needs.

   II. Scientifically Selecting Technologies and Solutions: The Right Fit Is the Best

  The market offers a wide array of positioning technologies—UWB, Bluetooth, LoRa, Beidou, and more—each suited to specific use cases. Choosing the wrong technology is one of the primary reasons for subpar project outcomes.

  Key Process:

  •   On-site environmental survey: Focus on special conditions such as metallic obstructions, multi‑level spaces, strong electromagnetic interference, and flammable or explosive environments.
  •   Technical Benchmarking Tests: Conduct multi‑technology field‑simulation tests in typical deployment areas to validate coverage performance, stability, and accuracy.
  •   Architecture Design: Network topology (wired/wireless convergence), power supply method (PoE/battery), and positioning engine and platform architecture.

  Pitfall Guide:

  •   Never place undue trust in laboratory data. Industrial environments are complex and require on-site surveys and validation. For example, within large steel‑frame factories, radio wave propagation characteristics differ markedly from those in open, unobstructed spaces.
  •   Pay attention to technology integration. A single technology may not be sufficient to cover all scenarios. In aerial‑borne optoelectronic personnel‑positioning systems, fused positioning solutions are commonly employed—e.g., one technology for main thoroughfares and another for complex indoor environments—enabling intelligent handover to ensure seamless, continuous coverage across the entire area.

  III. Standardized Deployment and Installation: Details Determine Success or Failure

  The installation phase is a critical stage, and construction quality directly affects the system’s ultimate performance and service life.

  Key Process:

  •   Develop detailed construction drawings, including the precise locations of base stations and beacons, route alignments, and power supply connection points.
  •   Standardized Installation: Strictly adhere to the specified installation height, angle, and spacing requirements to ensure seamless, dead‑zone‑free signal coverage.
  •   Phased commissioning: first, individual equipment is commissioned; next, regional network testing is conducted; finally, the entire system undergoes integrated commissioning.

  Pitfall Guide:

  •   Be vigilant about “location deviation.” The ideal locations shown on the design drawings may encounter obstacles such as load-bearing walls or utility lines on site, necessitating on‑site fine adjustments by technical personnel and the documentation of the final layout to facilitate subsequent operations and maintenance.
  •   Avoid potential risks to power supply and network connectivity. Prioritize the use of industrial‑grade PoE switches to power base stations, ensuring network stability. In explosion‑proof areas, only explosion‑proof equipment and construction methods that meet applicable standards may be used.

   IV. Prioritize Training and Ongoing Operations: Ensure the System Truly Comes to Life

  Going live is not the end—it’s the starting point for value creation. Many projects overlook training and operations, resulting in low system utilization.

  Key Process:

  •   Tiered Training: Conduct in-depth platform‑operation training for administrators, alert‑response training for security officers, and user‑training on terminal device deployment for regular personnel.
  •   Establish management policies: Integrate the use of the positioning system into the company’s safety management framework and clearly define reward and penalty mechanisms.
  •   Establish an operations and maintenance mechanism, encompassing routine equipment inspections, energy management, software updates, and data analysis and reporting.

  Pitfall Guide:

  •   Avoid the pitfall of “prioritizing construction over operations.” After system delivery, clearly define maintenance and support terms with the vendor and develop in-house operations personnel.
  •   Avoid data stagnation. Regularly analyze location data to unlock its value in optimizing operational workflows and preventing safety risks, thereby driving continuous improvement in management. For example, high‑frequency hotspot analysis can help refine the design of evacuation routes.

  The success of a personnel‑location system is a systematic undertaking that spans precise planning, informed equipment selection, standardized installation, and long‑term operational management. Any oversight at any stage can become a bottleneck, undermining the system’s overall performance. Hangfei Optoelectronics hopes this process and guideline will serve as a practical reference for your organization’s positioning project, enabling technology to truly enhance safety and efficiency and ensuring the smooth implementation of intelligent management.