Application Solution for the Aviation‑Flight Optoelectronic Personnel Positioning System in the Gas Industry
Category:
Author:
Aviation and Optical-Electronic Technology
Source:
www.hangfeid.com
Release Date:
2026-03-04
The gas industry encompasses the production, storage, transmission, distribution, and utilization of natural gas, with flammable and explosive hazards present at every stage, making it a quintessential high-risk sector. In scenarios such as gas holder maintenance, pipeline patrol, third-party construction supervision, and emergency response, traditional management approaches face practical challenges, including unknown personnel locations, difficulty verifying inspection compliance, and low rescue efficiency. Leveraging years of experience in industrial location services, Hangfei Optoelectronics has developed a personnel‑positioning solution that integrates UWB, BeiDou RTK, and Bluetooth technologies, providing gas utilities with comprehensive, all‑scenario location‑awareness capabilities across plants, pipeline networks, and work sites.
I. Policy Background and Industry Requirements
In recent years, the state has continuously promoted the deep integration of the industrial internet with the safe production of hazardous chemicals, issuing a series of policy documents that set forth clear requirements for the development of personnel‑location systems. In 2021, the Ministry of Emergency Management released the “Pilot Construction Plan for ‘Industrial Internet + Safe Production of Hazardous Chemicals,’” which designated personnel location as a core enterprise‑level application scenario. The 2022 “Guidance on the Construction of an Intelligent Safety Risk Control Platform for Hazardous Chemical Enterprises (Trial)” explicitly identified personnel location as one of six mandatory functions. Furthermore, the 2023 “Application Guidance for the Development of Personnel‑聚集 Risk Monitoring and Early‑Warning Functions Based on Personnel Location Systems (Trial)” refined technical specifications, stipulating a positioning accuracy of no more than 5 meters, a data‑collection interval of no more than 10 seconds, and the establishment of a tiered early‑warning mechanism.
In December 2024, the Ministry of Emergency Management issued the “Construction Standard for ‘Industrial Internet + Safe Production of Hazardous Chemicals’—Part 3: Personnel Positioning” (AQ 3064.3-2025). This standard is a mandatory industry standard and will be fully implemented effective July 1, 2026. This means that personnel positioning systems have become an essential requirement for safe production in hazardous chemical enterprises. As key entities subject to regulatory oversight, gas‑supply companies are urgently required to deploy such systems in accordance with relevant national standards, thereby ensuring compliance with policy requirements and enhancing intrinsic safety levels.
II. Technical Architecture and Deployment Approach
In response to the distinct characteristics of various scenarios faced by gas utilities, the system is deployed using a hybrid positioning approach.
Within the gas plant site, areas with major hazard sources—such as the gas holder area and the process unit area—feature complex environments characterized by steel‑structure obstructions and multipath interference. Moreover, confined‑space operations demand high positioning accuracy; therefore, UWB technology is employed to achieve centimeter‑level positioning. In contrast, auxiliary production zones, the front‑of‑plant area, and public spaces have relatively lower accuracy requirements, so Bluetooth beacons are deployed to provide 3–5 meter positioning coverage. All positioning data are transmitted back to the central control room server via LoRa base stations.
For long-distance pipelines and open‑air stations, BeiDou RTK positioning technology is employed to achieve sub‑meter accuracy in outdoor, unobstructed areas. When inspection personnel enter underground valve pits or satellite signal blind spots, the system automatically switches to Bluetooth‑based positioning, ensuring seamless indoor–outdoor coverage. The BeiDou RTK positioning cards carried by line‑inspection staff support 4G/5G connectivity, enabling real-time transmission of location data.
The system platform is deployed in the enterprise’s central control room and offers core functionalities such as GIS map visualization, trajectory playback, alarm management, and area‑based occupancy counting. It also provides standard API interfaces, enabling location data to be pushed to third‑party platforms—including emergency command systems, inspection management systems, and access control systems—facilitating unified integration and management across the enterprise.
III. Typical Application Scenarios
1. Control and Management of Major Hazardous Source Areas
UWB positioning beacons are deployed around major hazard sources such as gas holders and LNG storage tank areas to enable high‑precision area management. The system supports the creation of electronic fences on GIS maps, permitting access only to personnel holding valid work permits and within authorized time windows. If unauthorized individuals enter, the system triggers an audible and visual alarm; if the number of workers in a designated area exceeds a preset threshold, an over‑capacity alert is issued and safety officers are notified. When inspection personnel enter the vicinity of critical equipment, the system integrates with inspection tasks, automatically retrieving and presenting relevant equipment information to facilitate efficient operations.
2. Line Patrol and Third-Party Construction Supervision
To address the challenges of monitoring patrol‑line quality, the system supports inspection‑route playback and automated statistics, enabling it to determine whether inspectors have covered key nodes. If an inspection route deviates more than 5 meters from the pipeline’s centerline or fails to reach critical valve rooms, the system flags the inspection as “invalid” and generates a corresponding record. For construction activities near pipelines, the system can configure electronic fences; when construction equipment approaches within 5 meters of the pipeline’s centerline—a hazardous zone—the system simultaneously sends alerts to both the inspector’s mobile device and the construction crew’s location‑tracking tags, prompting them to halt operations and preventing third‑party damage. Upon reaching critical points such as valve pits and pressure regulating stations, the system automatically logs the check‑in time and location, effectively eliminating missed inspections and proxy signing.
3. Dynamic Management of Contractor Personnel
External contractors exhibit high turnover and varying levels of safety awareness. The system implements dual control over both qualifications and behavior through positioning cards. Once a positioning card is linked to an individual’s credentials, the card’s qualification status and location data are synchronized with the access control system, ensuring that all personnel entering the site are properly certified and authorized to work. The system also logs the movement patterns of contractor personnel within the facility; if prolonged presence in non‑work areas or unauthorized entry into restricted zones is detected, it automatically issues an alert and notifies supervisory staff for intervention. Based on the specific tasks at hand, the system defines authorized zones, allowing contractor personnel to operate only within their designated areas—any deviation triggers an alarm.
4. Emergency Rescue and One-Click SOS
In the event of emergencies such as leaks or fires, the one‑touch alarm button on the positioning card enables workers to quickly send a distress signal. The central control room’s large display immediately flashes to show the precise location of trapped personnel and can link to on‑site surveillance video, buying valuable time for rescue operations. The system supports personnel counting in emergency mode, automatically tallying the number of positioning cards in each area and distinguishing between those who have evacuated and those who remain trapped, thereby supporting informed emergency command decisions. The central control room can view real‑time heat maps of personnel distribution across all zones; in the event of an anomaly, it can swiftly pinpoint the affected area and guide evacuation efforts.
IV. System Configuration and Deployment
The system’s primary hardware components include integrated personnel‑location tags, Beidou RTK‑based personnel‑location tags, UWB beacons, Bluetooth beacons, LoRa base stations, and RTK reference stations. The location tags feature intrinsically safe, explosion‑proof design, making them suitable for gas‑related work environments. The software platform is deployed on servers in the central control room and provides functional modules such as GIS map visualization, trajectory playback, alarm management, and report generation and statistical analysis.
V. Application Benefits
In the realm of safety management, the system eliminates blind spots in personnel positioning within areas such as gas holders and confined spaces, shifting safety oversight from passive response to proactive early warning. In the event of a leak, it can pinpoint trapped personnel within seconds; coupled with an evacuation‑and‑inventory function, this significantly enhances emergency‑response efficiency. Additionally, the tiered alert system for crowd‑gathering situations effectively mitigates collective safety risks.
In terms of management efficiency, trajectory playback and on‑site compliance metrics ensure full coverage of inspection points, establishing a digital accountability framework where “whoever performs the task is responsible, and the workflow is fully traceable.” Automated performance assessments reduce the administrative workload, while electronic fencing lowers the need for on‑site supervisors.
From a compliance perspective, the system rigorously adheres to the mandatory AQ 3064.3-2025 standard, meeting specifications such as positioning accuracy of ≤5 meters and data‑collection intervals of ≤10 seconds, thereby helping enterprises pass inspections and acceptance by emergency management authorities and mitigate policy‑compliance risks.
VI. Typical Cases
Currently, this system has been deployed and put into practical use at numerous enterprises, including China National Petroleum Corporation, Sinopec, CNOOC, the National Energy Group, Yanchang Petroleum, and Dagang Oilfield, covering a wide range of scenarios such as refining and petrochemical operations, oil storage facilities, gas storage facilities, and field stations. It has provided reusable, proven best practices for personnel safety management in the gas and hazardous chemicals industries.