News Center

Before purchasing a positioning system, first ask the vendor these ten questions.


Category:

Author:

Aviation and Optical-Electronic Technology

Source:

www.hangfeigd.com

Release Date:

2026-04-08

For many enterprises, a procurement personnel positioning system represents a significant capital investment. With budgets ranging from several hundred thousand to over a million, it requires cross-departmental collaboration and is expected to be in use for many years after deployment.

However, in real-world projects, we’ve seen far too many cases where the initial signing is all excitement, but once acceptance is complete, things quickly grow quiet. Where does the problem lie? Often, it’s not that the technology falls short; rather, it’s that the right questions weren’t asked during the procurement phase, and the necessary details weren’t properly confirmed.

Hangfei Optoelectronics has been deeply engaged in the personnel‑location industry for many years, amassing experience from thousands of projects. Drawing on this practical expertise, we have compiled ten key questions to ask vendors before procuring a positioning system. These are not technical nitpicking; rather, they are designed to help customers clarify critical considerations during the selection process and avoid costly pitfalls down the line.

Question 1: Under what environmental conditions were the accuracy data obtained?

“Centimeter-level accuracy” is a common marketing claim in the industry, but customers need to know: was this figure obtained under laboratory conditions, or validated in real-world industrial settings?

Laboratory environments typically feature open spaces, unobstructed line-of-sight, minimal interference, and an optimally configured base station layout. In contrast, real-world industrial settings often involve complex factors such as metal utility tunnels, large equipment, pedestrian traffic, and electromagnetic interference, resulting in a significant gap between the two.

Suggested confirmation : Does the vendor support on-site testing at the customer’s premises? Can they provide actual accuracy data from similar scenarios?

Question 2: How many users can the system support online simultaneously?

A successful small-scale demonstration does not guarantee the same level of stability in a large-scale deployment.

The system’s concurrency requirements differ dramatically between hundreds of users online simultaneously and thousands. During peak periods, will data loss occur? Is latency jitter controllable? Will the platform remain smooth and responsive?

Suggested confirmation : What is the vendor’s maximum concurrent‑user scenario in similar use cases? Do you have any third‑party load‑testing reports?

Question 3: How long does the battery last on a tag? Who is responsible for replacing it?

Battery life is a key factor influencing long-term operational and maintenance costs.

The claimed battery life figures touted by some manufacturers often fall short of real-world performance. Meanwhile, replacing batteries on hundreds or even thousands of tags can incur labor costs that may exceed the value of the tags themselves.

Suggested confirmation : At what refresh rate were the battery life figures measured? Is battery replacement handled by the manufacturer or by the customer themselves, and how are the associated costs calculated?

Question 4: How is the false alarm rate controlled? Is the alarm mechanism flexible?

Electronic fence alarms are one of the core functions of a positioning system. However, if false alarms occur too frequently, monitoring personnel may choose to silence the alerts, leaving no one to respond when a genuine risk arises.

Suggested confirmation : Does the vendor provide quantifiable false‑alarm rate data? Do the alert rules support flexible configuration by region and time period? Is there a tiered handling mechanism that prioritizes high‑risk pop‑up alerts while logging low‑risk events in the background?

Question 5: Who creates the maps? How are update fees calculated?

Maps serve as the foundational layer of positioning systems, yet this stage often suffers from unclear delineation of responsibilities.

Manufacturers may expect customers to provide CAD drawings, while customers may believe the manufacturer should be responsible for on-site surveying. When the drawings do not match the actual site conditions, positioning points may shift, compromising performance.

Suggested confirmation : Are map surveying and production included in the quotation? What are the fee standards for subsequent map updates related to the plant‑site renovation, and what is the response time?

Question 6: Is there an additional fee for system integration?

Location data typically needs to be integrated with business systems such as video surveillance, access control, and MES. Some vendors’ “standard API” interfaces offer limited functionality, requiring additional development fees for actual integration.

Suggested confirmation What functionalities are included in the standard API interface? Is there an additional charge for integrating with third-party systems? If so, what is the approximate cost range?

Question 7: Do the hardware devices have explosion-proof certification and a protection rating report?

For industries such as chemical processing and mining, explosion-proof certification is a fundamental准入 requirement. Meanwhile, the IP protection rating determines the service life of equipment in harsh environments characterized by dust, moisture, and other challenging conditions.

Some manufacturers’ promotional materials claim “explosion-proof” and “IP67,” but they are unable to provide valid certificates upon inspection.

Suggested confirmation : Can the manufacturer provide a nationally recognized explosion-proof certification? Is there a third-party test report for the protection rating?

Question 8: What is the response mechanism for system failures?

No system can guarantee zero failures. The key lies in the vendor’s response speed and ability to resolve issues once a failure occurs.

Some vendors promise “24/7 service” in their contracts, but in practice, response times are often delayed and issues are frequently passed on to other parties.

Suggested confirmation What is the after-sales response mechanism? Is remote support provided, or is on-site service required? Are there clearly defined response timeframes for different levels of faults, and are these stipulated in the contract?

Question 9: Does the vendor have any successful implementation cases in the customer’s industry?

This is the most direct basis for determining whether a vendor has relevant experience in the target scenario.

Vendors with prior experience in similar projects have a more thorough understanding of potential risks and implementation challenges. For vendors lacking such experience, a client’s project may end up serving as their “training ground.”

Suggested confirmation : Can the vendor provide real-world case studies from the same industry and use cases? Do they offer on-site visits and opportunities to speak with existing customers?

Question 10: Aside from the contract amount, what other potential costs are there?

The total cost of ownership for a positioning system encompasses not only hardware but also multiple stages, including surveying and mapping, installation, commissioning, training, operations and maintenance, custom development, and subsequent upgrades.

Some vendors employ a strategy of “winning the bid with a low price and adding scope later,” resulting in total costs that far exceed the initial quotation.

Suggested confirmation In addition to the contract amount, what other budget items should the customer set aside? Can the vendor provide a comprehensive total cost of ownership (TCO) breakdown?

Practical Reference for Hangfei Optoelectronics

For the ten questions above, each manufacturer may offer different answers. Below, we share Hangfei Optoelectronics’ practical approaches to these issues, for our customers’ reference:

 
 
Problem Dimension Hangfei Optoelectronics’ approach
Accuracy Verification We support on-site POC testing at the customer’s premises, with results based on real-world measurements and not reliant on laboratory‑based claims.
Concurrency capability The platform has been rigorously validated through large-scale projects involving thousands of tags and maintains stable performance during peak periods.
Battery life tag UWB beacons: 4–6 years; Bluetooth beacons: 10–12 years, based on field‑measured data.
False Alarm Management Alarm classification and handling: high-risk alerts require mandatory confirmation, while low-risk alerts are logged in the background.
Cartography Clearly specify the fee range in the quotation to avoid additional charges later.
System Integration A full suite of standard APIs is available, and mature solutions are in place for integrating with common systems.
Explosion-proof certification The complete equipment is certified for national explosion-proof compliance, with an IP67 rating as a baseline, and all relevant certificates are in order.
After-sales service Clearly defined SLA: On-site response within 24 hours for issues that cannot be resolved remotely.
Industry Case Studies Numerous real-world implementation cases across industries such as chemicals, mining, power, and manufacturing are available for review and inquiry.
Cost transparency We provide a detailed cost breakdown at the time of quoting, with no hidden fees.

Written at the end

The procurement positioning system is a comprehensive engineering project that encompasses multiple stages, including technology selection, on-site implementation, operations and maintenance support, and service assistance.

Confirming key matters clearly before signing and expressly stipulating them in the contract is an essential prerequisite for ensuring the smooth delivery of the project.

If you are planning a personnel‑location project, please contact Hangfei Optoelectronics. We offer professional services including preliminary consulting, on‑site testing, and solution design to help you make more informed selection decisions.