News Center

What is the typical positioning accuracy of personnel‑tracking systems? And what levels can UWB, Bluetooth, and BeiDou achieve, respectively?


Category:

Author:

Aviation and Optical-Electronic Technology

Source:

www.hangfeigd.com

Release Date:

2026-04-15

📌   Introduction

In the wave of industrial digitalization and intelligent manufacturing, personnel positioning systems are transitioning from… “ Adding flowers to brocade ” from auxiliary tools to core infrastructure critical to safety and operational efficiency. However, in the face of an ever‑growing array of positioning technologies on the market… — UWB , Bluetooth, Beidou …… Many managers and engineers often find themselves puzzled: just how high can these technologies achieve positioning accuracy, and which scenarios are best suited to each? In this article, we will systematically examine the true performance limits of the three major mainstream positioning technologies, analyzing them from three perspectives: technical principles, accuracy levels, and application scenarios.

Let’s take a quick look at the key conclusions. :

  • UWB : 10~30 centimeter —— Centimeter-level accuracy ceiling, with the strongest anti-interference capability.
  • Bluetooth : Tradition RSSI Plan 2~10 Rice, Bluetooth 6.0 Channel detection range can reach 10 centimeter —— Maximum accuracy range, lowest cost
  • Beidou : Civilian base positioning is superior to 10 Rice, PPP Precision positioning is superior to 0.3 Rice, RTK Differential positioning can achieve centimeter-level accuracy. —— The king of outdoor wide-area coverage

📍   I. UWB (Ultra-Wideband): An industry benchmark with centimeter-level accuracy

Accuracy level

UWB ( Ultra-Wide Band , Ultra-Wideband (UWB) is currently the gold standard for high-precision indoor positioning. Its positioning accuracy typically falls within 10~30 centimeter Within the specified range, in actual industrial application environments, it is typically at 50 About a centimeter.

Technical Principle

UWB The reason it can achieve such high precision lies in its unique physical characteristics. It communicates and performs positioning by emitting extremely narrow pulses on the nanosecond or even picosecond timescale, with a typical channel bandwidth reaching 500MHz Above, this far exceeds traditional narrowband technologies. The receiver can accurately measure the pulse’s time of arrival ( Time of Flight , TOF ), thereby calculating distances down to the centimeter level. To put it in simple terms: if Bluetooth-based positioning is like looking at… “ Signal strength ” Come and guess the distance, then. UWB It's just directly. “ Stopwatch ” When measuring time, the precision is naturally several orders of magnitude higher.

Core Advantages and Use Cases

UWB The most prominent advantage is Extremely strong anti-interference capability . In industrial environments characterized by dense metallic structures and severe multipath reflections, UWB Thanks to its outstanding multipath resolution, it can clearly separate direct and reflected signals, ensuring stable positioning performance. Its operating frequency band covers… 3.1~10.6 GHz , avoiding the crowded 2.4GHz Frequency band, in Bluetooth and Wi-Fi In an environment where channels are contended for, UWB The signal can still be transmitted stably.

The main applicable scenarios include: High-risk areas in chemical plants, underground mine shafts, electrical substations, precision manufacturing workshops, and the tracking of sensitive medical instruments in hospitals. Such as indoor environments with stringent accuracy requirements.

2026 Latest annual trends : UWB Technology is evolving from a mere positioning function toward… “ Synesthetic Integration ” Upgrade—no longer just doing… “ Digital Key ” rather, it is a multifunctional platform that integrates positioning, radar sensing, and high-speed data transmission. Domestic manufacturers such as Aviation and Optical-Electronic Technology It has already applied this technology to chemical and mining environments, and its… UWB Beacons maintain centimeter-level positioning accuracy even in petrochemical plant areas with severe metal reflections.

📍   II. Bluetooth: A Leap from Meter-Level to Centimeter-Level Precision

Accuracy level

The accuracy of Bluetooth-based positioning technology varies significantly depending on the implementation approach; it can be said to be, among the three technologies, “ Maximum precision range ” of:

  • Tradition RSSI Plan : Accuracy is typically around 2~10 rice , suitable for region existence detection.
  • Bluetooth 5.1 AoA/AoD Plan : Accuracy can reach 0.3~1 rice , suitable for small-scale, high-precision applications.
  • Bluetooth 6.0 Channel Detection Scheme : Accuracy can reach 10 centimeter (centimeter-level), is 2026 A significant technological breakthrough of the year.

Technical Principle

Traditional Bluetooth-based positioning primarily relies on RSSI (Received Signal Strength Indicator) estimates distance by measuring the degree of signal attenuation; however, this method is heavily influenced by environmental factors such as walls, metal equipment, and human movement, resulting in typical accuracy at the meter level.

Bluetooth 5.1 Introduced AoA/AoD (Angle of arrival / The departure‑angle technique achieves positioning by measuring the direction of signals using an array antenna, with accuracy improved to sub‑meter level.

2026 The major breakthrough of the year came from Bluetooth 6.0 Channel detection ( Channel Sounding )   Technology that employs phase-based ranging ( PBR ) method, which calculates distance by measuring phase shifts at multiple frequencies, is less susceptible to environmental interference and, for the first time, has improved Bluetooth positioning accuracy to 10 Centimeter-level, close to UWB The level.

Core Advantages and Use Cases

The core advantage of Bluetooth lies in Low cost, flexible deployment, and a mature ecosystem. Every smartphone already supports Bluetooth, so no additional hardware is required. Bluetooth beacon devices consume extremely low power, allowing a single battery to last for several years.

Wide range of applicable scenarios: office building attendance tracking, mall shopping guidance, hospital patient management, smart warehousing, visitor trajectory tracking, and more. It should be noted that traditional… RSSI The solution exhibits a significant loss of accuracy in complex environments, so it is necessary to select an appropriate technical version based on actual requirements.

📍   III. Beidou: The King of High-Precision, Wide-Area Outdoor Positioning

Accuracy level

The BeiDou system is in 2026 This year, a major upgrade was completed, marking a qualitative leap in accuracy:

  • Global Basic Positioning : superior to 10 rice , covering the globe 200 Multiple countries and regions.
  • Precise Point Positioning ( PPP ) : Horizontal accuracy better than 0.3 rice , with vertical accuracy better than 0.6 rice , officially from “ Meter-level ” Entering “ Sub-meter level ” The era.
  • RTK Differential positioning : Available within the base station coverage area Centimeter-level ( 1~5 centimeters), suitable for high-precision industrial applications.
  • Military grade :可达 0.1 rice (Decimeter-level).

Technical Principle

The BeiDou system is a global satellite navigation system independently developed by China. By receiving satellite signals, it calculates position with broad coverage and eliminates blind spots worldwide. 2026 year 3 In [month], Beidou completed its coverage of [location]. 50 A large-scale remote software upgrade of in-orbit satellites has improved positioning accuracy from the meter level to 0.3 meters. The key to this breakthrough lies in inter-satellite link technology and a software-defined satellite architecture, enabling satellite constellations to perform autonomous calibration and data exchange, thereby fundamentally transforming conventional approaches. “ Satellite launch is now finalized. ” Industry regulations.

Core Advantages and Use Cases

The unique advantages of the BeiDou system are: Global coverage 、 No ground base stations need to be deployed. (excluding differential enhancement), Supports short-message communication . In addition, the onboard hydrogen atomic clocks of the BeiDou system each 300 The annual error does not exceed 1 Seconds, providing a highly reliable time reference for critical industries.

However, BeiDou also has obvious limitations: It cannot be used in environments with severe signal blockage, such as indoors, inside tunnels, or under elevated bridges. 。

Applicable scenarios include: Construction sites, port terminals, open-pit mines, field exploration, smart agriculture, and logistics transportation. Wait for an open outdoor work site.

📊   IV. Horizontal Comparison of Three Technologies

Comparison dimension

UWB (Ultra-Wideband)

Bluetooth

Beidou

Typical accuracy

10~30cm

2~10m ( RSSI ) / 0.3~1m ( AoA ) / 10cm ( CS )

Superior to 10m (Basic) / 0.3m ( PPP ) / cm Level ( RTK )

Coverage范围

50~100 Meter (between base stations)

Tens of meters to 200 rice

Global

Indoor suitability

✅   Excellent (Strong Anti-Interference)

✅   Good (densely deployed)

❌   Indoor lockout

Outdoor suitability

⚠ ️ Base stations need to be deployed.

⚠ ️ Base stations need to be deployed.

✅   Global coverage

Equipment cost

High

Low

Medium (terminal receiver)

Power consumption

Medium

Extremely low

Medium

Ecological Maturity

Developing

Extremely high (billions of devices)

High ( 230+ Country)

Note: RSSI= Received Signal Strength Indicator; AoA= Angle of arrival; CS= Channel detection; PPP= Precise Point Positioning; RTK= Real-time kinematic positioning.

🔄   V. Integrated Positioning: An Inevitable Choice Driven by Scenarios

No single technology can fully meet the diverse needs of complex scenarios, making integrated positioning the prevailing trend. Deployment is carried out in core high-risk areas. UWB Achieve centimeter-level high-precision positioning; in typical areas, deploy Bluetooth beacons for cost-effective meter-level coverage; and in open outdoor environments, integrate the BeiDou system to enable wide-area tracking. —— By integrating multi-source positioning data through a unified management platform, a real-time, all‑scene personnel movement map is generated.

For example, a large-scale construction site may use the BeiDou system outdoors. RTK Track vehicle and personnel locations, while also utilizing it at the indoor structural level. UWB High-precision security management is implemented, while the project office area employs Bluetooth-based attendance tracking. This layered, integrated architecture strikes a balance among accuracy, cost, and deployment complexity.

In practical implementation, domestic technology vendors such as Aviation and Optical-Electronic Technology Provided “UWB Beacon + Bluetooth beacon ” The integrated solution has already been deployed at numerous large energy and chemical enterprises: it has been put into operation in high-risk areas such as reaction vessels and tank farms. UWB Centimeter-level positioning: In typical factory walkways, Bluetooth beacons provide coverage, meeting stringent regulatory accuracy requirements while keeping overall deployment costs within a reasonable range.

✅   VI. Selection Guide: Which Technology Should You Choose?

When selecting a positioning technology, it is recommended to evaluate it across the following dimensions:

Scene-based judgment

Scene Type

Recommended Technology

Typical accuracy requirements

High-risk areas in chemical plants, underground mines, and precision manufacturing

UWB

10~30 centimeter

Healthcare and elderly care, shopping mall navigation, office building access control

Bluetooth ( RSSI )

2~10 rice

Construction sites, port terminals, and open-pit mines

Beidou ( RTK )

Centimeter-level

Multi-scenario, integrated industrial park (with both indoor and outdoor areas)

Fusion positioning ( UWB+ Bluetooth + Beidou)

Region-specific adaptation

Key criteria for judgment

  1. Precision requirements : Do you need centimeter-level or meter-level accuracy?
  2. Environmental conditions Indoor, outdoor, or mixed? Are there metal obstructions or multipath interference?
  3. Coverage范围 : Local area or the entire plant / Global?
  4. Budget constraint : Consider hardware costs, deployment costs, and maintenance costs separately.
  5. Integrate with the existing system : Whether it is necessary to with MES , Integration with video surveillance, access control, and other systems?

📌   Conclusion

UWB Bluetooth and Beidou each have their own distinct levels of accuracy and application boundaries; there is no… “ Which one is the best? ” The absolute answer is only “ Which one is the most suitable? ” The realistic choice.

  • UWB With centimeter-level accuracy and robust anti-interference capabilities, it is indispensable in high-risk industrial environments.
  • Bluetooth With extremely low cost, ultra-low power consumption, and a vast ecosystem, it achieves the broadest coverage across both consumer and commercial applications.
  • Beidou With global coverage and continuously improving accuracy, it stands out as a leader in wide-area outdoor positioning.

2026 Year, with Bluetooth 6.0 Channel sounding boosts Bluetooth accuracy to 10 centimeters, the BeiDou system will, through a software upgrade, PPP Precision breakthrough to 0.3 Rice, UWB As we move toward integrated sensing-and‑communication, the boundaries of positioning technologies are continually being redefined. The ultimate trend is: Multi-technology integration and scenario adaptation —— Let positioning systems truly serve as an intelligent, security‑ensuring defense line, rather than merely a contest of individual technological performance.

In a nutshell: Choose for high-risk indoor environments such as chemical plants and mines. UWB For medium-precision indoor scenarios such as smart factories, shopping malls, and hospitals, Bluetooth is the preferred choice; for wide-area outdoor coverage, BeiDou is the ideal option. A fused positioning solution that leverages the strengths of all three approaches represents the optimal solution in complex environments.