News Center

What new technologies are used in factory personnel positioning systems?


Category:

Author:

Aviation and Optical-Electronic Technology

Source:

www.hangfeigd.com

Release Date:

2025-02-26

In recent years, driven by the rapid advancements in the Internet of Things, communication technologies, and artificial intelligence, numerous new technologies have emerged in the development of factory personnel positioning systems. For example: UWB (Ultra-Wideband), Bluetooth RSSI , Bluetooth AOA 、 RTK Moreover, these technologies not only enhance positioning accuracy and coverage but also elevate the system’s intelligence and broaden its application scenarios. Today, we will compare the strengths and limitations of various technologies and examine which integration approaches best meet the personnel‑location needs of industrial facilities.

The following is a comparative table of the advantages and disadvantages of several common positioning technologies:

Technology

UWB

Bluetooth RSSI

Bluetooth AOA/AOD

RTK

Positioning Principle

By employing nanosecond‑level pulse signals and measuring distance via time‑of‑flight, high‑precision positioning is achieved.

By receiving signal strength ( RSSI ) Estimate the distance to achieve coarse localization.

By measuring the angle of arrival of the signal ( AOA ) or the launch angle ( AOD ) Achieve positioning.

By leveraging carrier-phase differential technology and integrating base station correction data, centimeter-level high-precision positioning is achieved.

Positioning accuracy

Centimeter-level ( 10-30 centimeters)

Meter-level ( 2-5 meters)

Sub-meter level ( 0.5-1 meters)

Centimeter-level ( 1-3 centimeters)

Coverage范围

Short distance (usually less than 100 meters)

Medium and short distances (typically less than 50 meters)

Medium and short distances (typically less than 50 meters)

Long range (dependent on base station coverage, typically up to several kilometers)

Anti-interference capability

Strong (strong signal penetration and resistance to multipath interference)

Weak (easily affected by environmental interference, such as walls or metal obstructions)

Moderate (less susceptible to environmental interference)

Strong (dependent on base station correction, with strong resistance to multipath interference)

Power consumption

Medium

Low

Low

High (both terminals and base stations have relatively high power consumption)

Cost

Relatively high (high hardware costs, complex deployment)

Low (low hardware costs, simple deployment)

Medium (moderate hardware costs, relatively complex deployment)

High (high base station and terminal costs, complex deployment)

Deployment difficulty

Relatively high (requires deploying multiple base stations and involves complex calibration)

Low (simple deployment, no complex calibration required)

Medium (requires deployment support) AOA/AOD Base stations (calibration is relatively complex)

High (requires deployment of base stations and a differential correction system; calibration is complex)

Applicable Scenarios

Indoor high-precision positioning (e.g., in factories, warehouses, hospitals)

Indoor coarse positioning (e.g., shopping malls, office buildings)

Indoor medium-accuracy positioning (e.g., factories, shopping malls)

Outdoor high-precision positioning (e.g., construction sites, farmland, drone navigation)

Real-time performance

High (real-time positioning, low latency)

Moderate (affected by signal fluctuations, with poor real-time performance)

High (real-time positioning, low latency)

High (real-time positioning, low latency)

Scalability

Medium (suitable for small-area, high-precision positioning; higher expansion costs)

High (suitable for large-scale, coarse positioning; low expansion costs)

Medium (suitable for medium-range, medium-accuracy positioning; with moderate cost scalability)

Low (suitable for high-precision positioning in fixed areas, with high expansion costs)

Typical Applications

Factory personnel positioning, warehouse logistics, and medical equipment tracking

Shopping mall navigation, asset tracking, smart home

Factory personnel positioning, mall navigation, smart office

Precision agriculture, drone navigation, and surveying and mapping

Advantages

-  High precision
-  Strong anti-interference capability
-  Good real-time performance

-  Low cost
-  Simple deployment
-  Low power consumption

-  Relatively high accuracy
-  Good real-time performance
-  Low power consumption

-  Ultra-high precision
-  Strong anti-interference capability
-  Good real-time performance

Disadvantages

-  High cost
-  Deployment complexity
-  Limited coverage

-  Low accuracy
-  Weak anti-interference capability
-  Poor real-time performance

-  Relatively high cost
-  Deployment is relatively complex.
-  Limited coverage

-  High cost
-  Deployment complexity
-  Dependent on base station coverage
-  High power consumption

From the comparison table above, we can draw the following conclusions:

  • UWB : Suitable for indoor scenarios with extremely high precision requirements, but it is costly and complex to deploy.
  • Bluetooth RSSI : Suitable for low-cost, coarse‑grained positioning scenarios, but with limited accuracy and poor resistance to interference.
  • Bluetooth AOA/AOD : Between UWB and Bluetooth RSSI Between them, it is suitable for scenarios requiring medium precision.
  • RTK : Suitable for high-precision outdoor positioning scenarios, but it is costly and relies on base station coverage.

        In the development of the factory personnel positioning system, we Depending on the specific application requirements—such as accuracy, cost, and coverage—users can select the most suitable positioning technology or adopt a multi‑technology fusion approach to achieve superior performance. As a professional provider of positioning systems, Hangfei Optoelectronics can address users’ pain points in workforce management by offering the aforementioned technologies and customized integrated positioning solutions, thereby meeting diverse user needs and leveraging cutting-edge innovations to usher in a new chapter in factory personnel management.