How can we address the blind spots in positioning within mixed indoor–outdoor environments? This solution is both cost-effective and ensures uninterrupted connectivity.
Category:
Author:
Aviation and Optical-Electronic Technology
Source:
www.hangfeigd.com
Release Date:
2026-04-29
The manager monitoring the surveillance system noticed that just moments earlier, Old Li had been clearly seen walking from the open-air storage yard toward the workshop. Yet as soon as his trajectory reached the factory gate, it vanished into thin air—his entire presence seemed to have evaporated from the system.
There is outdoor. GPS , No signal indoors; install indoors UWB As soon as they step through the gate, they lose connectivity. This embarrassing situation—where devices go offline right at the entrance—is all too common in many industrial parks, business parks, and construction sites. What makes matters even more challenging is that, to achieve reliable positioning in mixed‑use environments, organizations often face a tough dilemma: if they skimp on investment, the connection drops frequently; but if they pile on hardware, their budgets simply can’t keep up.
So, in mixed indoor–outdoor scenarios, which positioning solution can both cut costs and ensure seamless, continuous tracking of personnel across the entire area? This article lays out the numbers.
I. Why GPS Does it become ineffective as soon as you enter the gate? Traditional solutions have two major drawbacks.
Many people, at first, take the easy way out and simply use pure… GPS Or use the Beidou positioning system. It’s indeed low-cost, and the free satellite signals are convenient to use. However, as soon as a worker pushes a forklift into a steel‑structure factory building, an underground warehouse, or any covered area, the signal gets blocked by the structure, causing the backend tracking to go offline instantly. What’s even more problematic is that during those few seconds of disconnection, it becomes impossible to determine where the person has gone or whether they’ve entered a hazardous zone.
Since GPS No way—then we’ll lay it across the entire factory. UWB 。 UWB It offers high indoor positioning accuracy, reaching centimeter-level precision. However, UWB A base station’s coverage radius is only a few dozen meters. To achieve seamless, dead‑zone‑free coverage across an outdoor storage yard spanning dozens of acres and along the main access road, the number of base stations would need to be multiplied several times over. With each base station costing several thousand yuan, plus installation and cabling expenses, the total cost can easily exceed one million yuan—a price tag that most enterprises find hard to swallow.
Even more awkward is that, even if the entire factory were to implement it… UWB The moment you step from outdoors into indoors, the coordinate systems of the two systems become misaligned, causing abrupt algorithmic switching and resulting in trajectory jitter. Even though the person has clearly entered the door, the icon remains stuck outside—hardly distinguishable from a lost connection.
So the conventional approaches either save money at the cost of frequent disconnections, or require heavy investment yet remain unstable. Is there a third way?
II. A Hybrid Networking Approach That Truly Saves Money and Ensures Uninterrupted Connectivity
An efficient approach is to select tailored technology combinations based on the characteristics of each region, ensuring seamless end-to-end connectivity without incurring unnecessary costs. Currently, the industry widely recognizes three cost‑effective hybrid solutions, each designed to meet specific scenario requirements.
First, a single‑Beidou plus Bluetooth beacon fusion solution. This approach is well suited for industrial parks with extensive outdoor areas and relatively limited indoor spaces, such as port terminals or large petrochemical facilities. The system leverages standalone Beidou satellite positioning, complies with China’s information technology innovation policies, and ensures full control over data. At the same time, it is supplemented by… AGNSS The technology can reduce the time to first fix, enabling faster positioning. In indoor environments, a small number of Bluetooth beacons are deployed to address obstruction issues, and all positioning data is transmitted via… LoRa Long-distance backhaul for base stations. LoRa It features low power consumption, long battery life for end devices, and no data‑usage fees. With a relatively small number of beacons overall, both installation effort and costs remain manageable.
Second, UWB Beacon-plus-Bluetooth beacon integration solution. This solution is particularly well-suited for critical areas within a plant that require high‑precision positioning, such as hazardous equipment zones in petrochemical facilities or smart factories. Deploy it in these key areas. UWB Beacons enable centimeter-level accuracy; in common areas such as corridors, office spaces, and large outdoor zones, Bluetooth beacons provide coverage. The two systems share positioning terminals and LoRa Base station. The biggest advantage of this solution is that it eliminates the need for separate power and low-voltage wiring work. UWB Both beacons and Bluetooth beacons are battery-powered, with low installation and ongoing maintenance costs.
Third, UWB A fully integrated solution that combines Bluetooth and the BeiDou navigation system. This solution is well-suited for scenarios that feature both large open-air storage yards and complex indoor structures, while also demanding high precision—such as port terminals, power and energy facilities, and large petrochemical plants. It leverages BeiDou’s wide-area outdoor coverage, UWB Indoor high-precision positioning and seamless handover with Bluetooth beacons. The overall number of beacons is relatively small, eliminating the need for separate power and low-voltage cabling, making deployment quick and convenient, with positioning accuracy that can reach 0.5 Rice strikes a balance between cost and performance.
Moreover, all three solutions rely on coordinated algorithms at the underlying level. Hardware alone is not sufficient; the key lies in the handover algorithm that manages transitions between different positioning sources. If the system merely switches abruptly, even with a signal connection, the trajectory will still drift. In this regard, Hangfei Optoelectronics’ fusion solution has reached a high degree of maturity. When a device enters the overlapping zone near an entrance, they employ a dynamic weighting algorithm to enable Bluetooth signals to intervene early and fill the transitional blind spot, seamlessly transitioning into indoor positioning. UWB Or the Beidou network. On the monitoring display, the trajectory appears as a smooth, continuous curve—without any breaks or jumps.
Therefore, the key to saving costs without compromising connectivity lies not in piling on hardware, but in selecting the right technology stack for each use case and fine-tuning the underlying handover algorithms.
III. Cost and Effectiveness Comparison of Three Scenarios
Pure UWB Full‑coverage solution: High hardware costs—several thousand yuan per base station—and extensive outdoor coverage may require dozens or even hundreds of base stations. Installation and cabling are time‑consuming, with significant disruption to existing plant operations. Overall project costs typically range from 500,000 to 2 million yuan, resulting in the lowest cost‑effectiveness.
Single‑Beidou plus Bluetooth beacon fusion solution: Leveraging the free Beidou satellite signal for outdoor coverage, while indoors only a small number of Bluetooth beacons need to be deployed, in conjunction with… LoRa Return transmission. Hardware investment is higher than pure… UWB The solution costs less than half as much, requires no extensive cabling, has a short installation timeline, and incurs no data‑usage fees. It’s well suited for outdoor‑centric settings with limited indoor space, such as open‑air storage yards and port terminals.
UWB Bluetooth integration solution: Deploy only in critical areas. UWB Beacons; in other areas, Bluetooth beacons are used. Compared to a purely… UWB This solution can reduce costs by 40% to 60% while maintaining centimeter-level accuracy in critical areas. Because the beacons are battery-powered, there’s no need for high‑voltage or low‑voltage electrical work, and subsequent maintenance is straightforward. It is currently a popular choice among large manufacturing enterprises, chemical plants, and logistics parks.
UWB Bluetooth‑plus‑Beidou full‑integration solution: Among the three, it offers the most comprehensive coverage, requires fewer beacons, and is easy to deploy. Its cost falls between the first two, lower than a pure… UWB Saves 30% to 50%, making it ideal for complex factory sites that demand high precision across the entire area.
From the perspective of actual operational performance, the latter three integration solutions all enable round-the-clock, uninterrupted trajectory playback. Whether indoors or outdoors, the electronic fence provides real-time alerts, eliminating the previous issue of an intruder entering the premises without triggering the alarm.
IV. Real-Life Case: From Humiliation at the Entrance to Factory-Wide Coverage with No Blind Spots
Take a large nonferrous metals smelting enterprise as an example. The plant features both expansive open-air raw-material stockpiles and intricately structured, multi‑level enclosed smelting workshops, with a mixed environment of workers and vehicles. Before the adoption of an integrated positioning solution, safety officers became particularly anxious during shift changes: as soon as they reached the factory entrance, their location data would freeze or even disappear, rendering emergency alerts essentially ineffective.
Later, they turned to Hangfei Optoelectronics and implemented a solution that combines outdoor BeiDou positioning with indoor Bluetooth beacons in the core area. UWB The hybrid networking solution used less than the pure UWB With half the budget of the original plan, we achieved seamless, full‑area coverage across the entire plant.
The results are striking: from driving a forklift outdoors to entering the factory gate and then moving into the core equipment area of the production workshop, the workers’ movement paths are seamlessly displayed as a continuous trace on the monitoring screen. Managers can now track in real time each worker’s journey between the outdoor storage yard and the indoor workshop, eliminating the embarrassment of unauthorized entry. A comprehensive electronic perimeter has also been fully activated—whether it’s an outdoor vehicle exceeding the speed limit or an indoor worker inadvertently entering a high‑risk zone, the system issues an alarm within seconds.
Minister Li, who oversees safety and environmental protection, said that in the past, the connection would drop as soon as they reached the entrance, leaving them with no choice but to rely on manual monitoring. Now, no matter where personnel go, their movement tracks remain continuous, which provides much greater peace of mind.
Written at the end
Positioning in mixed indoor–outdoor environments is no longer a simple matter of purchasing a few pieces of hardware and installing a handful of antennas; it has become a full‑scale systems engineering project that requires seamless integration across both software and hardware layers. Balancing cost efficiency with uninterrupted connectivity across the entire coverage area—seemingly contradictory goals—can only be achieved through meticulous scenario analysis and expert technology selection.
If you’re fed up with the embarrassment of entering your premises, consider bringing your factory‑floor blueprints for a professional mixed‑mode positioning diagnosis. Sometimes, a fresh perspective can be far more effective than shelling out millions.
(This paper’s solutions and data are both based on industry research and technical practice.)