News Center

How to choose a personnel positioning system for a chemical plant? After switching among three vendors, here are six lessons learned to help you avoid common pitfalls.


Category:

Author:

Aviation and Optical-Electronic Technology

Source:

www.hangfeigd.com

Release Date:

2026-06-17

Three years ago, our factory decided to implement a personnel‑location system. At that time, industry standards for personnel tracking had not yet been established, and the pressure to ensure workplace safety came primarily from internal management practices and verbal directives issued by local regulatory authorities. Our approach was straightforward: we would compare offerings from several vendors and select the one with the most competitive price.

As a result, this one choice ended up spanning three years, during which I switched among three different vendors.

The first vendor offered the lowest price, signed the contract fastest, yet delivered the most problems after going live. They advertised centimeter-level positioning accuracy, but once deployed in the tank farm, the location data drifted significantly—despite the user being right there. A The workshop is shown on the map at B Tank farm. The electronic perimeter fence generates over a hundred false alarms per day, so the monitoring operator simply disables the alarm pop-ups. Despite an investment of more than 100,000 yuan, the system is essentially ineffective.

The second one boasts impressive technical specifications, PPT It looked good on paper, but during deployment we discovered it was all off‑the‑shelf components. The base stations, tags, and software platform were sourced from different vendors. When issues arose, we contacted after‑sales support, only to be told that the relevant module wasn’t manufactured by them and that we’d have to wait for a response from the upstream supplier. With the entire system down for a week and the plant shut in full to assist with troubleshooting, the resulting losses far exceeded the cost of the system itself.

The third company finally learned its lesson and conducted a thorough, meticulous evaluation of potential solutions. It was only then that they realized selecting a personnel‑location system for a chemical plant involves far more nuances than they had initially imagined.

The following 6 These lessons were hard-earned at a steep price, and we hope they help our peers avoid unnecessary detours.

Lesson One: Explosion-proof certification is not an optional bonus—it is a mandatory requirement.

When the first two vendors submitted their quotes, they both assured that their equipment met explosion‑proof requirements. However, at the time, we were unclear whether this meant a verbal commitment or the presence of an official certificate. We later learned that all positioning base stations and personnel tags deployed in hazardous (explosive) areas must carry explosion‑proof certification issued by a nationally recognized authority. Without such certification, operating the equipment in a hazardous area itself poses a significant safety risk.

Lesson Two: Don’t take centimeter-level accuracy claims at face value—always conduct tests in a real-world factory setting.

Before signing with the first vendor, they gave us a demo in the office building, and the positioning accuracy was indeed impressive. But as soon as we moved into the production area, metal canisters obstructed the signal and overhead cranes caused interference, causing the positioning points to drift significantly.

Later, technicians from Hangfei Optoelectronics explained to us that the core challenge of most positioning systems lies in the lack of robust backend algorithms after the hardware has been acquired. The hardware collects signals, while the algorithms process them and distinguish between genuine and spurious data. Without a reliable fusion‑based noise‑reduction algorithm, the collected signals are susceptible to metal reflections and multipath effects, resulting in inaccurate positioning.

We recommend requiring suppliers to conduct operations at their actual factory premises. POC Testing focuses on three key metrics: whether accuracy remains stable under metal equipment and dense piping; whether the system experiences lag when hundreds of tags are online simultaneously; and whether position data drifts after a week of continuous operation.

Lesson Three: Be wary of OEM manufacturers and clarify the source of the technology.

It wasn’t until the second vendor ran into trouble that we figured out their base stations were… A Factory private labeling, labels from B Factory procurement, software by C The company outsources development. Under this model, if anything goes wrong at any stage, no one can resolve it, because no single entity possesses the full technical expertise.

When selecting a solution, be sure to confirm whether the core positioning algorithm is developed in-house, and whether it is protected by patents or software copyrights. Also, inquire about the size and background of the R&D team. Reputable vendors with genuine technical expertise can clearly explain their algorithmic logic; those who offer vague answers or dodge details are likely merely system integrators.

Lesson Four: It’s not the quantity of features that matters, but their practicality.

The first two vendors have been competing on the number of features they offer—dozens of report templates, centimeter‑level accuracy, and fully customizable development. But in practice, only a handful of these actually prove useful: electronic fences let you define restricted zones on a map and trigger an alarm when someone enters; stationary‑detection alerts sound if a worker suddenly collapses or remains motionless for an extended period; trajectory playback paired with video enables precise reconstruction of personnel movements after an incident; and departure‑from‑post and overcapacity alerts provide early warnings when critical posts are unattended or when hazardous areas exceed their capacity. Most of the other flashy features end up going unused. When choosing a system, it’s not about who has more features—it’s about which ones can truly address real‑world challenges.

Lesson Five: Don’t just look at the hardware price—consider the total cost of ownership.

The first vendor offered the lowest hardware price, but subsequent issues kept piling up. The personnel tags claimed a battery life of one year, yet in reality they ran out of power in less than six months. Over 500 tags had to be removed, recharged, and reinstalled—just the labor costs alone were substantial. When a base station failed, we had to wait for the vendor’s technicians to come on-site, and each repair necessitated halting production.

A personnel positioning system typically has a lifespan of five to eight years. When selecting a solution, be sure to clarify whether the software is purchased outright or billed on an annual subscription basis, and whether after-sales support comes with clear response time guarantees. SLA Are the agreements and interface documentation publicly available? White-label vendors often lure customers with low‑cost hardware while charging recurring fees for software, whereas truly capable original manufacturers can offer transparent, end-to-end lifecycle service solutions.

Lesson Six: The system must be able to integrate with the existing infrastructure and avoid becoming an information silo.

One of the biggest issues with the first two systems was that they operated independently from the plant’s existing video surveillance, access control, and other systems, resulting in disconnected data and a lack of interoperability. A well-designed positioning system should be able to… API 、 SDK By adopting such approaches, data interoperability with existing systems can be achieved, enabling seamless integration into the overall security management framework rather than creating yet another information silo that requires separate maintenance.

Written at the end

After switching among three manufacturers and enduring three years of trial and error, we ultimately chose Hangfei Optoelectronics.

At first, we were hesitant—after all, the previous two vendors had left us deeply disappointed. But Hangfei Optoelectronics’ approach put our minds at ease: they first dispatched a technical team to conduct an on-site assessment of the plant, developing tailored deployment strategies for different areas—such as the tank farm, the process unit area, and the storage zone—and then carried out trials in the actual production environment. POC Testing—let the data speak, not… PPT Speak.

More importantly, Hangfei Optoelectronics is one of the rare original manufacturers that independently develops its entire product stack—from positioning base stations and positioning cards to backend software. Its products boast comprehensive explosion-proof certifications and utilize Bluetooth beacons and… UWB The beacon‑fusion solution delivers centimeter‑level, high‑precision positioning in high‑risk areas while providing low‑cost Bluetooth beacon coverage in ordinary zones. The system seamlessly integrates with existing systems such as video surveillance and access control, ensuring it is practical, easy to use, and durable over time. After a major domestic petrochemical enterprise adopted the Hangfei Optoelectronics system, the incidence of unauthorized intrusions into high‑risk areas decreased by more than… 90% , the efficiency of emergency evacuation drills has improved by approximately 30% , this is the actual performance.

There are no small matters when it comes to safety; precision in positioning is essential. We hope that our… 6 These lessons will help you avoid several pitfalls in the equipment selection process. For chemical enterprises, workplace safety cannot afford repeated trial-and-error.