Explosion-proof, centimeter-level positioning, and ultra-long battery life: How can you choose a personnel‑location system for chemical plants without running into pitfalls?
Category:
Author:
Aviation and Optical-Electronic Technology
Source:
www.hangfeigd.com
Release Date:
2026-07-09
Step into any modern chemical plant, and you’ll see pipelines, storage tanks, and reaction vessels everywhere—safety is always the first line of defense in production operations. With the Ministry of Emergency Management’s “No. …” 3 Part : With the promulgation and implementation of the “Construction Specification for Personnel Positioning in ‘Industrial Internet Plus Hazardous Chemicals Safety Production,’” personnel positioning systems have transitioned from optional equipment to an essential safety measure for chemical enterprises.
However, the market offers a wide array of positioning solutions, each with its own strengths and limitations. Selecting, within budget, a system that meets explosion‑proof standards, delivers sufficient accuracy, and provides long battery life has become a practical challenge for many procurement professionals in the chemical industry. Below, we will examine the key selection criteria by breaking them down across three core metrics.
I. Explosion-proof certification is the primary criterion for equipment selection.
When deploying electronic equipment in chemical plants, explosion-proof certification is an absolute prerequisite. Any positioning hardware lacking proper explosion-proof certification must not be installed in hazardous explosive areas. This is a decisive factor in the selection process and allows for no compromise.
Chemical plants typically operate in explosive gas atmospheres, and all positioning base stations and personnel tags used in hazardous areas must hold explosion-proof certification issued by a national authority. Once the certificate is obtained, three key aspects require particular attention:
- Certification Standards : Domestically, with GB 3836 The series shall prevail; internationally recognized standards include IECEx and ATEX , at least one of which must be met.
- Explosion-proof rating : Common requirements for chemical engineering projects are Ex ib ⅡC T4 Gb . Among them “ib” Indicates intrinsically safe explosion-proof. “II C” Suitable for the most hazardous gas environments, such as hydrogen and acetylene. "T4" Indicates that the maximum surface temperature of the device does not exceed 135℃ , “Gb” Corresponds to a high protection rating. The rating is only upward‑compatible and cannot be downgraded.
- Protection rating : The equipment has reached IP66/IP67 and above …to withstand dust, corrosion, and brief immersion in chemical environments.
II. Positioning Accuracy Determines the Effectiveness of Safety Management and Control
Within chemical plants, a fence or pipeline is often used to separate safety zones from explosion‑hazard areas, and personnel locations must be pinpointed to the specific side. If positioning errors exceed several meters, the reliability of features such as electronic fencing and perimeter‑intrusion alarms is severely compromised; failure to trigger when it should, or frequent false alarms, can undermine operational effectiveness.
The high-precision technology currently recognized across the industry is UWB (Ultra-Wideband). UWB It does not rely on signal strength; instead, it measures distance by emitting nanosecond‑scale pulses and calculating the time of flight. Thanks to its high temporal resolution, UWB Naturally achievable 10 To 30 Centimeter-level positioning accuracy. Meanwhile, UWB With its wideband spectrum and short-pulse characteristics, it boasts strong anti‑interference performance, enabling stable real‑time positioning even in chemical plants where metal pipelines are densely packed and the electromagnetic environment is complex, while effectively filtering out drift caused by reflected signals.
Meanwhile, traditional Bluetooth-based positioning relies on signal strength ( RSSI ) Estimate the distance, with accuracy typically around 3 To 10 Meters, in a metal-rich multipath environment, exhibit significant error fluctuations. Even with Bluetooth’s… AoA The technology can achieve sub-meter-level accuracy, but its stability under complex reflection conditions remains inadequate.
Selection reminder: In areas housing high-risk process units and around major hazard sources, it is mandatory to use… UWB Achieve centimeter-level positioning; in areas with lower precision requirements, such as office spaces and standard warehouses, a Bluetooth‑based solution can be adopted to keep costs under control. A mature system should integrate high‑precision and wide‑coverage deployments, rather than relying on a single technology to cover all areas.
III. Battery life directly impacts long-term operational and maintenance costs.
Personnel‑location tags are wearable devices that workers carry on a daily basis. If their battery life lasts only a few days or weeks, managers must frequently collect them for recharging or replace the batteries, which not only increases the workload but also requires more frequent entry into hazardous areas—posing additional risks in itself.
There are significant differences in battery life among various technical solutions. Bluetooth-based location tags are battery-powered, with very low sleep current, resulting in exceptionally long battery life and enabling long-term, maintenance-free operation. UWB The positioning tags have slightly higher instantaneous power consumption, but with advances in chip technology, some models can now meet the demands of everyday shift‑based use. Meanwhile, Bluetooth beacons deployed at fixed locations—functioning as base stations—are battery‑powered and require no wiring, with a battery life that can reach… 5 To 8 In that year, the frequency of on-site maintenance visits was significantly reduced.
When selecting devices, prioritize low‑power‑consumption positioning terminals, with particular attention to two key parameters: sleep current and maintenance‑free interval. Longer battery life reduces long‑term operational costs and minimizes the safety risks associated with battery replacement in hazardous areas. Consider the economics: a tag with a two‑year battery life can save dozens of maintenance visits to hazardous zones over five years compared to a one‑month‑life tag, resulting in lower overall costs.
IV. The integration of multiple technologies is the norm for mature solutions.
Having reviewed the three metrics above, some may wonder: Is there a system that can simultaneously deliver explosion-proof performance, centimeter-level accuracy, and long battery life? The answer is yes—but achieving this requires not a single technology alone, but rather the integrated deployment of multiple technologies.
Hangfei Optoelectronics, which has been deeply engaged in the industrial Internet of Things and high-precision positioning for over a decade, employs the following in its chemical plant personnel positioning system: UWB , Bluetooth beacons and LoRa A combined architecture. Deployed in high-risk areas. UWB Beacons enable centimeter-level precision management; deploying Bluetooth beacons in ordinary areas achieves low-cost, wide-area coverage. LoRa As a data backhaul channel, the technology ensures reliable transmission in open‑area plant sites and multi‑building environments. All hardware is fully certified for explosion protection and has been operating reliably at several large petrochemical and pharmaceutical enterprises for over five years.
Three-Step Selection Process to Avoid Common Pitfalls
In summary, when selecting a solution, you can follow these steps:
Step one: Verify the explosion-proof certification. Require suppliers to provide the original explosion-proof certificates for each hardware model, and meticulously cross-check the model numbers and protection levels—this is an absolute non-negotiable requirement.
Step two: Clarify the technical solution. Inquire about the specific positioning technologies to be deployed in each area, and determine whether high-risk zones will be equipped with such systems. UWB How to achieve coverage in ordinary areas and how to transmit data back—integrated solutions are often more reliable than relying on a single technology.
Step three: calculate the total cost of ownership. Don’t focus solely on the equipment’s upfront purchase price; instead, factor in battery replacement, charging, and labor‑related maintenance costs over the next three to five years. In the long run, solutions with extended battery life typically offer a more favorable total lifecycle cost.
When selecting a personnel positioning system for a chemical plant, explosion-proof compliance is the non-negotiable safety baseline, accuracy ensures functional reliability, and battery life is key to cost reduction—none of these can be overlooked. We hope this guide helps you clarify your priorities and choose a system that truly meets your specific needs, enabling you to effectively safeguard every critical aspect of safe production.