News Center

What costs are most easily overlooked when requesting a quote for a personnel positioning system? 12 key tips to avoid pitfalls.


Category:

Author:

Aviation and Optical-Electronic Technology

Source:

www.hangfeigd.com

Release Date:

2026-09-23

In short: the real cost of a personnel positioning system =  Hardware unit price × Quantity +  Deployment and installation +  Software functional modules +  Industrial-grade certification premium +  Later operation and maintenance. If you place an order based solely on hardware quotes, the total cost is often higher than the budget by 30%–50% 。

1. First, clarify: which type are you " Positioning ” Paying for?

If you don't lock in the technical route before requesting quotes, all subsequent cost comparisons are invalid. The cost logic of mainstream solutions on the market is completely different:

  • Bluetooth RSSI/ Beacon solution : Accuracy 2–5 meters, beacon unit price 30–100 RMB, suitable for " which area a person is located in ” area-level management requirements;
  • Bluetooth AOA Solution : Accuracy 0.5–2 meters; cost is roughly 2 times that of ordinary Bluetooth, suitable for high-precision indoor tracking;
  • UWB Solution : Accuracy 10–30 centimeters, strong anti-interference; base stations and tags are the most expensive, and it's standard in high-risk scenarios such as chemical plants, mines, and utility tunnels;
  • Hybrid solution : UWB Control high-risk areas, Bluetooth / Beidou covers general areas, balancing accuracy and budget.

Key pitfalls to avoid 1 : first determine " Accuracy ” , then ask about " Price ”。  Same coverage 1 10,000 square meters, UWB the total cost of the solution may be 3–5 times. If you don't first lock in accuracy requirements, the numbers on quotes are not comparable.

2. 12 Two most easily overlooked cost items

Omitted items: 1 On-site survey and signal testing fees

Low-cost solutions often omit on-site surveys and directly use " a standard model ” to report the number of base stations. But industrial sites have dense metal equipment and complex structures, causing serious signal blockage; the actual number of base stations required may be 1.5–2 times. This survey fee may seem extra, but it will actually save you rework costs far exceeding the fee itself before construction.   Hangfei Optoelectronics insists on surveying before quoting, precisely because only by understanding the site can the budget be kept under control.

Omitted items: 2 : base station's " Industrial-grade premium ”

On the quotation " Base station ¥XXX/ each ” After that, the protective rating and explosion-proof certification are often not specified. The price difference between ordinary commercial base stations and industrial-grade base stations may be 2–3 times. Chemical plants and mines require equipment to have Ex explosion-proof certification and IP67/IP68 protection; a device without explosion-proof certification is itself a major hidden danger. Be sure to confirm when quoting: does the base station have the explosion-proof rating and protection standards required for the scenario?   All of Hangfei Optoelectronics' products have obtained national explosion-proof certification, with the rating reaching Ex ib IIC T4 Gb 。

Omitted items: 3 : of positioning tags' " Stripped functionality ”

Basic tags can only locate, while tags needed in industrial scenarios often need to integrate: SOS one-touch emergency call, access control card functionality, vibration alerts, buzzer alarms, etc. If you only quote as " Positioning tags ” when requesting a quote, you may get a simplified version without any safety functions.   Hangfei Optoelectronics' positioning terminals come standard with SOS a button; when in danger, pressing it triggers a one-key alarm, and the platform immediately pops up and shows the location.

Previous