News Center

Principle of the UWB personnel positioning system


Category:

Author:

Source:

Release Date:

2025-04-24

Professional Introduction to the Principles of UWB (Ultra-Wideband) Personnel Positioning Systems

I. Technical Overview

UWB (Ultra-Wideband) positioning technology is a wireless localization technique that relies on ultra‑wideband radio pulse signals. By transmitting and receiving nanosecond‑ or sub‑nanosecond‑duration ultra‑short pulses, it leverages parameters such as time-of‑arrival differences, angle‑of‑arrival differences, or signal strength to achieve high‑precision personnel localization. UWB offers several advantages, including strong anti‑interference capability, high positioning accuracy, excellent penetration, and robust multipath resolution, enabling stable positioning performance even in complex environments.

II. Core Principles

1.  Signal Characteristics and Transmission Mechanisms
  • Ultra-wideband signal UWB signals typically have a bandwidth exceeding 500 MHz, or a relative bandwidth greater than 20%, with extremely narrow pulse widths on the order of nanoseconds, and their signal energy is spread across an exceptionally wide frequency band.
  • Pulse modulation : Information is encoded in the timing or amplitude of pulses, using techniques such as pulse-position modulation (PPM) or pulse-amplitude modulation (PAM).
  • Multipath resolution : Due to its extremely narrow pulse width, UWB signaling can effectively resolve multipath components, thereby reducing the impact of multipath effects on positioning accuracy.
2.  Positioning method

UWB positioning system The following positioning methods are commonly used:

  • Time of Arrival (TOA) :
    • By measuring the time-of-flight of a signal from the tag to the anchor base station and applying the speed of light, the distance can be calculated.
    • Formula: , among which    For the speed of light,   For the signal propagation time.
  • Time Difference of Arrival (TDOA) :
    • By measuring the time differences of signal arrivals at multiple base stations and applying the hyperbolic positioning principle, the tag’s location is calculated.
    • Formula: , among which    and    They are, respectively, the signal arrival at the base station.    and    The time.
  • Angle of Arrival (AOA) :
    • The tag’s location is determined by measuring the angle of arrival of signals using an antenna array, in conjunction with the base station’s position.
    • Formula: 。
  • Signal strength (RSSI, Received Signal Strength Indicator) :
    • Distance is estimated by measuring signal strength and applying a path-loss model.
    • Formula: , among which    For receiving power,   For the transmit power,   is the path loss exponent,   For distance,   For shadow fading.
3.  Localization algorithm
  • Triangulation :
    • By using TOA or TDOA measurements from three or more base stations, a system of equations is formulated to solve for the tag’s position.
    • Formula: , among which    For the base station coordinates,   To calculate the distance.
  • Weighted Least Squares (WLS) :
    • Weighting measurement errors to enhance positioning accuracy.
  • Particle filter algorithm :
    • By integrating the motion model and the observation model, dynamic localization is achieved through particle updating and resampling.

III. System Composition

1.  Hardware equipment
  • Tag :
    • Worn on the person, responsible for launching. UWB pulse signal 。
    • It typically includes a UWB chip, a microcontroller, a battery, and an antenna.
  • Base Station (Anchor) :
    • Fixed at a known location within the positioning area, it is responsible for receiving tag signals and measuring parameters such as time, angle, or signal strength.
    • It includes a UWB transceiver, a clock synchronization module, and a communication interface.
  • Sync Device :
    • It is used to achieve clock synchronization among base stations, ensuring the accuracy of TOA and TDOA measurements.
    • Typically, GPS synchronization, the IEEE 1588 protocol, or dedicated synchronization signals are used.
2.  Software system
  • Positioning Engine :
    • It is responsible for receiving measurement data uploaded from base stations and running positioning algorithms to compute the tag’s location.
    • Supports multiple positioning methods and algorithm switching.
  • Management Platform :
    • Provides a user interface for configuring system parameters, monitoring device status, and displaying positioning results.
    • Supports historical trajectory queries, geofence configuration, and alarm management.
  • Application Programming Interface :
    • Provides APIs or SDKs to facilitate integration with other systems, such as security systems and ERP systems.

IV. Key Technologies

1.  High-Precision Clock Synchronization
  • UWB positioning demands extremely high clock synchronization accuracy, typically on the order of nanoseconds.
  • Clock synchronization among base stations is achieved using GPS synchronization, the IEEE 1588 protocol, or dedicated synchronization signals.
2.  Multipath Suppression and Anti-Interference
  • The wideband nature of UWB signals endows them with intrinsic multipath resolution.
  • By integrating RAKE receivers, channel estimation, and equalization techniques, interference robustness is further enhanced.
3.  Low-power design
  • Tags are typically battery-powered and require optimized transmit power and communication protocols to extend their battery life.
  • It employs a low-power UWB chip and a wake-up mechanism to reduce standby power consumption.
4.  High-Density Scene Optimization
  • In high‑density areas, it is necessary to optimize base station deployment and scheduling algorithms to minimize interference among tags.
  • System capacity is enhanced by employing spatial diversity, temporal diversity, or code-division multiple access (CDMA) techniques.

V. Performance Specifications

  • Positioning accuracy Typically, it can reach 10–30 cm (in indoor environments); in outdoor settings, multipath effects may cause a slight reduction.
  • Refresh rate : Supports adjustable frequencies from 1 to 100 Hz, meeting the needs of various application scenarios.
  • System capacity A single base station can support the simultaneous localization of hundreds of tags, and system capacity can be scaled by increasing the number of base stations.
  • Coverage范围 : A single base station can provide a coverage radius of 50–100 meters, and large‑area coverage can be achieved by cascading multiple base stations.

VI. Application Scenarios

  • Industrial manufacturing : Personnel positioning, asset management, and security monitoring.
  • Medical care and elderly care : Patient monitoring, infant anti-theft, emergency call.
  • Construction work : Personnel attendance, hazardous area control, and material tracking.
  • Logistics and warehousing : Cargo positioning, route planning, inventory management.
  • Public Safety : Prison management, judicial security, emergency rescue.

VII. Technical Advantages

  • High precision : Centimeter-level positioning accuracy, meeting the requirements of most applications.
  • High reliability : Strong anti-interference capability, suitable for complex electromagnetic environments.
  • Low latency : Real-time positioning with short response times.
  • Easy deployment : Base stations are easy to install, requiring no complex cabling.
  • Scalability : Supports large-scale tag ingestion, with scalable system capacity.

VIII. Development Trends

  • Fusion positioning By integrating technologies such as Bluetooth, Wi‑Fi, and inertial navigation, multi‑source data fusion positioning is achieved, enhancing accuracy and reliability.
  • AI empowerment : Leverage machine learning and deep learning techniques to optimize localization algorithms and path planning.
  • 5G integration : Deeply integrated with 5G networks, it delivers positioning services with ultra-low latency and ultra-high reliability.
  • Standardization : Promote the standardization of UWB technology and foster the development of the industry ecosystem.
The following video provides an overview of the principles behind UWB-based personnel positioning systems, covering system features, positioning dimensions, application scenarios, and functionality in detail.