News Center

What are the functions and purposes of a personnel positioning system?


Category:

Author:

Source:

Release Date:

2025-04-29

The personnel positioning system is an intelligent management tool that integrates technologies such as the Internet of Things, communications, and big data. Its core functionality revolves around “precise location tracking” and, through multidimensional data interaction, delivers comprehensive value in areas like safety management, efficiency enhancement, and risk early warning. The following discussion will elaborate on this system from three perspectives: functional architecture, application scenarios, and technological advantages.

I. Core Functional Modules

1. Real-time Positioning and Trajectory Tracking

  • Technical Principle : Leveraging positioning technologies such as UWB (ultra-wideband), Bluetooth AOA, and GPS/BeiDou, centimeter- to meter-level positioning accuracy is achieved.
  • Functional Performance :
    • Dynamic positioning : Displays personnel’s 3D coordinates (longitude, latitude, altitude) in real time and supports 2D/3D map visualization.
    • Track Playback : Records personnel’s historical movement paths and supports filtering and querying by time and location.
    • Heatmap Analysis : Calculate population density within designated areas to support the optimization of spatial layouts (e.g., mine tunnels, factory workshops).
  • Case study : A chemical industrial park used location-based heat maps to detect excessive personnel density in a particular workshop, promptly evacuated workers, and adjusted the production schedule to prevent potential safety hazards.

2. Security Alerts and Emergency Response

  • Electronic fence : Virtual boundaries are established in hazardous areas (such as mine goafs and high-voltage electrical rooms). When personnel enter these zones in violation of regulations, an audible and visual alarm is triggered, and a notification is sent to the management terminal.
  • Overstay Alert : Issue an alert for personnel who have been stationary for longer than the threshold time (e.g., in cases of unconsciousness or being trapped due to equipment failure), and assess the risk level by integrating environmental sensor data such as gas concentration and temperature.
  • Emergency Call (SOS) : Personnel can initiate an emergency call with a single tap on the positioning terminal, and the system automatically pinpoints their location and triggers the rescue procedure.
  • Data support According to statistics from the National Mine Safety Administration, the use of positioning systems has increased the efficiency of mine accident rescues by 40% and reduced unauthorized entry into restricted areas by 85%.

3. Attendance and Working Hours Management

  • Automatic attendance tracking : By leveraging location data to record personnel entry and exit times as well as duration of stay in specific areas, electronic attendance reports are generated, thereby reducing human‑error in manual calculations.
  • Task Assignment The dispatch center can dynamically assign the nearest qualified worker to address equipment malfunctions based on personnel location and skill data, reducing response time by 60%.
  • Case study : A logistics warehouse optimized pickers’ routes using a positioning system, increasing daily picking output by 25%.

4. Data Analysis and Decision Support

  • Behavioral Analysis : Track workers’ movement paths, dwell times, and area‑access frequencies to optimize workflows (e.g., by reducing unnecessary travel).
  • Compliance Check : Automatically verifies personnel qualifications (such as special‑operation certificates) against job‑area requirements to ensure compliant operations.
  • Trend Forecasting : Predict peak periods of personnel movement based on historical data and proactively adjust resource allocation (e.g., security patrol routes).

II. Typical Industry Applications and Their Roles

1. Mine Safety Production

  • Risk Management and Control : Real-time monitoring of underground personnel distribution to prevent overcapacity operations; in the event of an accident, pinpoint the location of trapped personnel within 10 seconds and plan the optimal rescue route.
  • Efficiency improvement : Optimize roadway layout and equipment maintenance schedules using positioning data to reduce downtime.
  • Compliance Assurance : Automatically generate record documents that comply with the requirements of the Coal Mine Safety Regulations, thereby meeting the inspection needs of regulatory authorities.

2. Industrial Manufacturing and Logistics

  • Lean Production : Track workers’ movement paths, optimize line layouts, and reduce material-handling distances; use location data to monitor the qualifications of equipment operators and prevent non-compliant operations.
  • Inventory Management : Track the locations of forklifts, AGVs, and other equipment to enhance logistics dispatch efficiency.
  • Case study : A certain automobile factory optimized welders’ work paths using a positioning system, reducing the production takt time by 15%.

3. Medical and elderly care institutions

  • Baby anti-theft : Attach a location‑tracking wristband to newborns and set up an electronic fence; any unauthorized removal will trigger an immediate alarm.
  • Fall monitoring : The device uses the terminal’s accelerometer to detect falls and automatically alerts medical staff.
  • Medication Reminder : Use location data to send medication reminders to the nurses’ station, preventing missed or incorrect doses.

4. Commercial Buildings and Public Spaces

  • Crowd management : Monitor crowd density in shopping malls, exhibition halls, and other venues, and dynamically adjust security and cleaning resources.
  • Emergency Evacuation : In the event of a fire, the positioning system guides occupants to evacuate quickly, preventing congestion and stampedes.
  • Experience Optimization Analyze customer hotspots to optimize store layout and promotional strategies.

III. Technical Advantages and Value Analysis

1. Technical Comparison

Indicator

Traditional method

Personnel positioning system

Increase幅度

Positioning accuracy Regional level (hundred-meter scale) Meter-level/sub-meter-level 10–100 times
Response time Minute-level Second-level More than 60 times
Data timeliness Manual post-event statistics Real-time dynamic updates ∞ (Immediacy)
Rescue efficiency Dependent on manual search Precise positioning + route planning 40%+

2. Core Values

  • Safety Value : Reduce the incidence of accidents and ensure the safety of personnel (e.g., in mine flooding incidents, location data can be used to quickly pinpoint trapped individuals).
  • Economic value : Reduce downtime losses and improve equipment utilization (e.g., one factory achieved annual cost savings exceeding one million by optimizing location-based processes to shorten equipment‑failure response times).
  • Management Value : Achieve human–machine–environment collaboration and drive intelligent transformation (e.g., leveraging 5G+UWB positioning technology to support the scheduling of autonomous mining trucks).
  • Social value : Aligns with the requirements for green mines and smart factories under the “dual carbon” goals, enhancing the company’s corporate social responsibility image.

IV. Future Development Trends

  1. Multi-technology integration : By integrating with technologies such as AI, 5G, and AR, it enables the coordinated analysis of positioning data with video surveillance and environmental sensors.
  2. Health Monitoring : By integrating sensors such as heart rate and blood oxygen monitors into the positioning terminal, real-time health alerts can be issued for personnel.
  3. Seamless positioning : By leveraging millimeter-wave radar, geomagnetic sensors, and other technologies, personnel positioning can be achieved without the need to wear any wearable devices (e.g., fall detection in elderly care facilities).
  4. Standardization and Interoperability : Promote industry‑wide positioning protocols and standardized data interfaces to reduce system integration costs.

Summary

The personnel positioning system through Precise positioning, real-time alerts, data-driven insights The three core capabilities elevate traditional “man‑to‑man” management to an intelligent, visual, and proactive control model. Their value extends beyond safety management, permeating areas such as production process optimization, resource allocation, and compliance oversight, thereby serving as the “foundational infrastructure” for enterprises’ digital transformation. As technology continues to evolve, their application scenarios will expand further into smart cities, intelligent transportation, and other domains, generating broader societal benefits.