News Center

UWB Beacon Deployment Area and Spacing


Category:

Author:

Source:

Release Date:

2025-04-30

The deployment range and spacing of UWB beacons must be determined comprehensively based on the specific application scenario, accuracy requirements, signal coverage, and environmental characteristics. Deployment strategies vary significantly across different settings; the following provides a detailed analysis:

I. Scope of Arrangement

Cover the target area
UWB beacons must be installed at the geometric periphery or key locations within the target positioning area to ensure seamless, dead‑zone‑free signal coverage. For example, in industrial settings such as chemical plants and power stations, coverage should extend across the operational zones of personnel and vehicles; in narrow, elongated spaces like tunnels and utility tunnels, beacons should be deployed linearly along the designated pathways.

Signal Coverage Requirements
The deployment area of beacons must meet the required positioning accuracy. For example, in an open space measuring 100 meters by 100 meters, UWB beacons can achieve sub-meter‑level positioning with as few as 16 units, whereas Bluetooth beacons would require 121 units. UWB beacon Its communication range exceeds 30 meters, with a coverage radius of up to 100 meters (2D), and a single-point ranging distance greater than 500 meters.

 

II. Spacing Arrangement

  1. General Spacing Recommendations
    • Open area : The recommended beacon spacing is 30 to 50 meters, depending on the environmental complexity and the required positioning accuracy.
    • Complex environment In areas with obstructions or signal interference, the spacing should be appropriately reduced to 15–25 meters to ensure continuous signal coverage.
  2. Scenario-based spacing scheme
    • Industrial workshop : Deployed at 30-meter intervals, it achieves centimeter-level positioning accuracy, meeting the real-time tracking needs of personnel, vehicles, and equipment.
    • Tunnel/Utility Tunnel :
      • One-dimensional positioning : For straight‑line routes, deploy a single base station every 400 meters (e.g., VDU2506), or a dual‑base station every 800 meters (e.g., VDU2506D).
      • Three-dimensional positioning : A height difference (Z-axis coordinate) must be established; base stations should be added at obstructions such as columns and walls, with spacing adjustable between 100 and 200 meters.
    • Smart Construction Site/Mining Site : Depending on the terrain complexity, beacon spacing can be set between 30 and 50 meters, and combined with an electronic fence function to enforce perimeter control in hazardous areas.
  3. Special Scenario Optimization
    • Presence Detection Mode : Suitable for scenarios where only coarse positioning is required (e.g., corridors, tunnels), with beacon spacing that can be increased to 15–25 meters.
    • Hybrid topology : Presence-detection anchors are installed at the entrance, while high-precision anchors are placed inside the room; functional zoning is achieved through wall partitions or distance-based separation.

III. Key Influencing Factors

Ambient Occlusion
Obstructions such as concrete walls and steel can weaken signal strength; therefore, it is necessary to increase the number of beacons in the detection area or adjust their orientation to mitigate multipath interference.

Positioning accuracy requirements
High-precision scenarios (such as sub-meter‑level positioning) require reducing the beacon spacing to within 30 meters; in coarse‑grained positioning scenarios (such as presence detection), the spacing can be increased to 50 meters or more.

 

Beacon Performance Parameters

  • Battery life : The built-in lithium‑battery beacon can remain in standby for up to 2 months (at a 1 Hz refresh rate), and the deployment density should be adjusted based on battery life.
  • Protection rating : Beacons with an IP66 protection rating are suitable for outdoor or harsh environments, but ensure the installation location is kept away from water sources and high-temperature areas.

System compatibility
UWB beacons can be integrated with positioning technologies such as the BeiDou satellite system and Bluetooth to enable seamless indoor–outdoor switching. For example, BeiDou satellite positioning is used outdoors, while indoors… UWB beacon-based positioning , the beacon spacing can be adjusted to between 30 and 100 meters depending on the indoor area.