Bluetooth-based positioning technology is the most widely used indoor positioning technique.
Category:
Author:
Aviation and Optical-Electronic Technology
Source:
www.hangfeigd.com
Release Date:
2020-12-26
The era of the Internet of Everything is also the age of data supremacy. The location metadata of data determines its practical value. As the IoT industry continues to flourish, the demand for positioning technologies across a wide range of IoT use cases has grown significantly.
What is indoor positioning?
Indoor positioning refers to the management of the location of people or objects within indoor environments. Compared with outdoor settings, indoor spaces feature more complex and intricate layouts and a greater number of obstructions. Consequently, indoor positioning systems must meet higher standards for accuracy and robustness against interference. Below, we will introduce several indoor positioning technologies.

Common indoor positioning technologies on the market
1. Bluetooth Technology
The core of Bluetooth-based indoor positioning technology lies in deploying and installing Bluetooth devices throughout the environment. Positioning tags actively capture Beacon signals transmitted by these deployed Bluetooth beacons, then wirelessly relay the collected beacon data via LoRa to a positioning base station. The base station forwards this information over a wired network to a positioning server, which, using the known coordinates of the Bluetooth beacons, performs position estimation to determine the real-time location of the target person or object.
The positioning principle employed is based on Bluetooth-based active localization, which, under ideal conditions, can achieve a positioning accuracy of 1 to 3 meters. The Bluetooth beacons used for localization are compact and offer long operational lifetimes. Building on precise positioning, this solution costs only a fraction—often as little as one-tenth—of conventional UWB or RFID‑based approaches. Compared with Wi‑Fi‑based positioning, Bluetooth is less susceptible to environmental interference, and its extremely low power consumption, combined with its widespread adoption, has made it the most widely deployed technology in indoor positioning systems.
2. Ultra-Wideband Technology (UWB)
UWB is a low‑power wireless communication and sensing technology. Unlike existing narrowband communication systems, it leverages an ultra‑wide bandwidth of 500 MHz to transmit data, enabling positioning accuracy down to the centimeter level. However, UWB also has limitations: on the one hand, its high operating frequency and wide bandwidth can interfere with other existing wireless communication systems; moreover, when indoor obstacles such as solid walls are encountered, UWB signals can attenuate by 60–70%, leading to increased positioning errors. Additionally, steel plates strongly absorb UWB pulse signals, rendering UWB unable to achieve reliable localization. On the other hand, compared with positioning technologies like Wi‑Fi, Bluetooth, and RFID, UWB exhibits a significant price advantage in terms of base stations and tags—typically more than tenfold—resulting in persistently high overall system costs.
3. ZigBee Technology
ZigBee indoor positioning technology establishes a network by connecting multiple blind nodes to be localized with a reference node of known location and a gateway, with each tiny blind node communicating with others to achieve localization.
ZigBee is an emerging short-range, low‑data‑rate wireless networking technology that relays data from one node to another via radio waves. As a low‑power, low‑cost communication system, ZigBee offers high efficiency; however, its signal transmission is susceptible to multipath effects and mobility. The positioning accuracy of ZigBee depends on channel physical characteristics, the density of signal sources, environmental factors, and the precision of the algorithms used, which can lead to relatively high software costs and significant room for improvement.
4. Wi-Fi Technology
Wi‑Fi positioning technology leverages a wireless Wi‑Fi local area network (WLAN) composed of wireless access points, including wireless routers, to enable localization, monitoring, and tracking in complex environments.
It relies on the location information of network nodes (wireless access points) and employs a hybrid approach that combines empirical measurements with signal propagation models to perform location management for connected mobile devices, achieving a maximum accuracy ranging from approximately 1 to 20 meters. If positioning is based solely on the currently associated Wi‑Fi access point—rather than leveraging a composite map of surrounding Wi‑Fi signal strengths—Wi‑Fi‑based localization can easily incur errors, such as incorrect floor identification. Furthermore, Wi‑Fi access points typically cover only a radius of about 90 meters and are susceptible to interference from other signals, which can degrade accuracy; additionally, the power consumption of the positioning device tends to be relatively high.
5. Infrared Technology
Infrared‑based indoor positioning relies on optical sensors installed indoors to detect modulated infrared signals emitted by mobile devices (equipped with IR tags), achieving relatively high positioning accuracy. However, because light cannot penetrate obstacles, infrared signals propagate only within line of sight, making them susceptible to interference from ambient lighting. Additionally, the short transmission range of infrared radiation significantly degrades indoor positioning performance. When a mobile device is carried in a pocket or obscured by walls, its operation can be disrupted. Furthermore, deploying receiver antennas in every room and corridor drives up overall system costs.
Looking at the technologies currently used for indoor positioning, they can be broadly categorized into three types based on positioning accuracy: first, high-precision indoor positioning—on the centimeter scale, such as UWB, which achieves an accuracy of 10 to 50 centimeters; second, meter-level positioning, exemplified by Bluetooth iBeacon, with an accuracy of approximately 1 to 3 meters; and third, area‑level positioning, also known as proximity‑based positioning, including RFID, Wi‑Fi, and ZigBee.
The primary purpose of indoor positioning is not merely navigation; it is to manage the location of people and assets. In contrast, Wi‑Fi‑based positioning often struggles to maintain signal stability, falling short of the precision required for accurate localization. While UWB technology can achieve centimeter‑level accuracy, its cost remains prohibitively high. At present, Bluetooth‑based positioning is the most widely adopted solution. Its advantages include compact device form factors and a favorable price‑performance ratio at comparable accuracy levels. Compared with Wi‑Fi, Bluetooth is less susceptible to environmental interference, and its extremely low power consumption further enhances its appeal. Owing to these attributes, Bluetooth positioning has become the most prevalent technology for indoor location applications.
Hangfei Optoelectronics’ Bluetooth‑plus‑LoRa all‑wireless positioning system has benefited from years of market experience, boasting mature technology and broad market potential. Catering to the diverse positioning needs of different industries, Hangfei continues to innovate and explore, offering a range of indoor positioning solutions tailored to various sectors. These solutions deliver real‑time location data, intelligent inspection, static and dynamic electronic fences, behavior monitoring, one‑click alarm functionality, and other location‑based services, ensuring operational safety and enhancing the efficiency of enterprise production and maintenance. As we step into an era of IoT‑driven connectivity and ubiquitous interconnection, Hangfei Optoelectronics is forging ahead with confidence!