News Center

Port Salt-Spray Corrosion Environment: Real-World Case Study of Protective Technologies for the Hangfei Optoelectronics Personnel Positioning System


Category:

Author:

Aviation and Optical-Electronic Technology

Source:

www.hangfeigd.com

Release Date:

2026-06-02

I. Challenges Posed by Salt Spray Corrosion to Port Positioning Equipment

Port terminals are constantly exposed to a highly saline atmosphere and seawater spray. Sodium chloride particles carried in the air can form an electrolyte film on equipment surfaces, which then penetrates into internal components through crevices, leading to… Poor contact, signal attenuation, and circuit board short circuits Faults such as…

Statistics show that, over the past three years, as many as 37% , annual maintenance expenditure exceeds 200 Ten thousand yuan. Although some foreign-brand equipment is advertised as… IP65 Protection rating; however, after one year of operation in the port area, salt‑crystal deposits were observed in the housing gaps, and the internal circuit boards exhibited severe corrosion.

💡   Tip 1 : In a high-salt-fog environment, the equipment's IP The level of protection is critical. IP67 Only protection levels of IP67 and above (completely dust-tight and protected against brief immersion) can effectively prevent the long-term penetration of salt particles. The main equipment of Hangfei Optoelectronics meets IP67/IP68 Level.

II. Analysis of Protective Technologies for Aerial Photographic and Electro-Optical Equipment

Hangfei Optoelectronics is a company specializing in high-precision positioning ( UWB An industrial‑grade solution provider integrating technologies such as Bluetooth and Beidou. Its hardware delivers robust protection under extreme operating conditions, effectively addressing the challenge of corrosion in port environments.

✅   Explosion-proof certification and military-grade quality

The port’s hazardous‑materials area and oil‑and‑gas loading/unloading zone pose flammable‑risk hazards. The aerial‑photography optical‑electronic positioning base stations, employee ID badges, and beacons have all obtained national explosion‑proof certification. This certification imposes stricter requirements for component selection and testing under extreme environmental conditions, with superior performance in salt‑spray resistance, damp‑heat resistance, and vibration resistance compared to standard industrial products.

✅   Industrial-grade materials and packaging technology

The beacon housing is crafted from rigorously validated industrial-grade materials, offering excellent drop resistance and wear durability. Its encapsulation process strictly adheres to dust‑proof and waterproof standards, effectively guarding against port‑environmental contaminants and moisture ingress, thereby ensuring the long-term stable operation of the internal core circuitry.

💡   Tip 2 In a high-saline fog environment at the port, rinsing equipment surfaces with fresh water weekly—especially in crevices—can remove salt crystals and slow down corrosion.

III. Common Issues Q&A

Q1 : Does a salt-spray environment affect positioning accuracy?
A : Hangfei Optoelectronics adopts UWB , multi‑technology fusion positioning including Bluetooth and Beidou. In areas obscured by quay cranes, it automatically switches to high‑precision mode. UWB , with an accuracy of 30 Centimeter-level accuracy; in open areas, it integrates BeiDou signals to enable seamless indoor–outdoor switching. In real-world operation, the signal remains stable, and operational efficiency is improved. 50%。

Q2 : Is equipment maintenance complex?
A : The positioning base station adopts PoE Power supply + Wireless backhaul: a single Ethernet cable handles both power and data transmission, reducing cable failure points in corrosive environments. The backend supports remote firmware upgrades and self‑diagnostic fault detection, eliminating the need for on‑tower inspections during routine maintenance.

Q3 How does the price compare with similar domestically produced equipment?
A : The hardware purchase price falls in the upper-middle range among domestic brands. However, when factored into the total cost of ownership ( Total Cost of Ownership , including three years of maintenance and downtime compensation), offering a clear cost‑performance advantage. After switching to Hangfei Optoelectronics, the number of repair work orders alone has decreased. 72% , with lower overall costs.

💡   Tip 3 : When selecting equipment, it is recommended to pay attention to Total Cost of Ownership Rather than the initial purchase price. In high-salt‑fog environments, the protection rating directly determines long-term operating costs.

V. Conclusion

Currently, the port dispatch and monitoring center’s 3D On the real‑world map, the location and movement tracks of every gantry crane, every straddle carrier, and every maintenance worker are clearly visible. These signals originate from aviation‑flight optoelectronic equipment that has been operating reliably in a salt‑spray environment for more than three years. —— They employ robust protective engineering to ensure continuous, reliable operation in corrosive environments.

Experience in equipment selection tells us that, under extreme operating conditions such as those found in ports, Protection capability is the cornerstone of positioning system stability. . Hangfei Optoelectronics, through its ultra-high sealing standards, military-grade quality control, and multi‑technology integration, has truly achieved… “ Can withstand wind and waves, and resist corrosion. ”。