Personnel positioning system integrated with electronic work permits: unauthorized personnel entering the work area trigger an automatic alarm.
Category:
Author:
Aviation and Optical-Electronic Technology
Source:
www.hangfeigd.com
Release Date:
2026-06-03
In high-risk industries such as chemical manufacturing and power generation, one phrase is repeatedly emphasized: No ticket, no work. . It means that any special operation —— Hot work, confined space entry, work at height, and so on —— A work permit must be obtained, and entry into the designated area is permitted only upon approval.
Everyone understands the principle, but putting it into practice is far from easy.
I’ve visited numerous production sites, and the most realistic picture I’ve seen is this: sprawling facilities with many work locations, high employee turnover, and a constant flow of external contractors and temporary visitors. Relying solely on a registration form at the gate and a single on-site supervisor shouting a few reminders simply isn’t enough to keep things under control. All too often, someone enters the work area without the proper permits, and management remains completely unaware—only becoming alert when an inspection team spots the issue or an incident occurs.
That’s also why we’ve been consistently promoting it. Integration of the personnel positioning system with electronic work permits In plain terms, it means letting the system perform the verification in place of a human. —— Who has entered the work area, whether they have a valid pass, the current time, and whether the location is correct—everything is automatically cross-checked. If any of these checks fail, an alarm is triggered immediately.
How did they get linked together?
The logic is actually quite simple—there are three steps: People, Tickets, District 。
Step one: digitizing work permits. In the past, paper-based permits were slow to approve, easy to lose, and required chasing signatures; now, everything is handled online. From application and approval to issuance, the system provides a clear, end-to-end record—detailing who the workers are, which area they’re heading to, and their start and end times.
Step two: Real-time personnel tracking. Individuals entering the facility wear a positioning terminal. —— It could be an employee badge, a wristband, or a hard hat tag, based on… UWB , Bluetooth AOA Alternatively, technologies such as the BeiDou system enable the system to track each individual’s location in real time, with accuracy at the meter level or even centimeter level.
Step three: integrate the two systems. The positioning system determines a person’s location, while the electronic work‑permit system identifies who is authorized to enter which area and during what time period. When an individual approaches the entrance to the work zone, the system automatically performs a match: if the person is on the approved list and the timing is correct, access is granted as usual; if the person is not on the authorized list or the permit has expired, the system triggers an alarm within seconds.
Alerting isn’t as simple as just popping up a window in the control room. On-site, it can trigger both audible and visual alarms while simultaneously pushing notifications to the safety officer’s and supervisor’s smartphones. Nearby cameras can automatically zoom in and lock onto the individual, with the live feed displayed directly on the large screen. The entire process requires no manual intervention—wherever a person goes, safety follows.
Why is this something that absolutely must be done?
On the one hand, it is a genuine safety requirement. As we often say, safety management must… “ Preventive measures ” However, in the past, most measures were reactive. By the time you notice an unauthorized entry, it’s often already too late. With an integrated system, it’s as if an invisible smart barrier has been installed at the entrance to the work area. —— People without tickets can’t even get through the door.
On the other hand, policies are also exerting pressure. 2026 year 7 month 1 Starting from today, the Ministry of Emergency Management has issued AQ 3064.3-2025 and AQ 3064.2-2025 Two standards are about to be enforced. The first mandates that personnel‑location systems must integrate with systems for special‑work permits, dual‑prevention management, and video surveillance. The second explicitly requires that work‑permit systems be linked to location‑tracking systems to close the data loop. To put it plainly, this is not optional—it’s a mandatory requirement.
A real-world case we have worked on.
Last year, we implemented this solution at a large refining and petrochemical enterprise under Sinopec. The plant covers a vast area, with numerous daily operations and a steady stream of external construction teams. Previously, the biggest headache for safety managers was: who had entered the work zone, who had failed to obtain the necessary permits, and who was still on the job even after their shift had expired—no one knew.
We deployed a multi-source fusion positioning system that covers the entire plant and integrated it with the existing electronic work permit system. Within the first month of operation, the system automatically detected over a dozen instances of unauthorized or overdue intrusions, triggering real-time alarms and linking to video for on-site verification. On one occasion, a contractor entered the wrong area—having barely stepped into the controlled zone when… 5 Within seconds, the on-site alarm sounded, and the supervising personnel immediately halted operations via walkie-talkie.
In the past, such incidents might not have been detected until an inspector happened to pass by—or might have gone entirely unnoticed. Today, all these activities are logged and fully traceable, providing tangible support for safety training and accountability.
To conclude
“ Automatic alarm when unauthorized personnel enter the work area. ” , it sounds like a feature, but at its core, it represents a shift in security management thinking. —— Shift from relying on manual monitoring to leveraging system‑based safeguards. As the implementation date of the new standards draws near, industries such as chemicals, power, and mining should promptly establish seamless integration between personnel management and permit‑to‑work systems—this is not only a matter of compliance but also a responsibility to every worker on site.
If your organization is facing similar challenges or is preparing to undergo the new standard’s certification, please feel free to contact us at any time. Henan Hangfei Optoelectronic Technology Co., Ltd. . We start from 2012 Since the year [year], we have been focusing on industrial-grade, high-precision positioning; this system… “ Positioning + Work Permit ” Our integrated solution has been running reliably across multiple large-scale petrochemical projects. Based on the specific conditions of your plant, we can provide end-to-end implementation—from solution design to deployment and go-live.
We welcome you to engage in discussions and conduct on-site assessments, and we also invite you to visit our case study sites. When it comes to safety, taking proactive measures early can help mitigate risks.