Management System for the Personnel Positioning System in Chemical Plants
The management system for personnel positioning in chemical plants is a critical measure to ensure safe production and enhance emergency response capabilities. Below is a framework for such a management system, covering equipment management, user access, data security, and emergency response:
I. General Provisions
Objective
Standardization Chemical Plant Personnel Positioning System The use and management of [system/device] ensure real-time, accurate personnel location data, enhance safety management, prevent accidents, and safeguard employees’ lives.
Scope of Application
Applicable to all employees, visitors, and contractor personnel within the chemical plant, covering all areas requiring monitoring, including production zones, storage areas, and hazardous zones.
Basic Principles
- Real-time performance Ensure that positioning data is updated in real time, with errors kept within an acceptable range.
- Accuracy : The positioning equipment meets national standards and is calibrated regularly.
- Security : Protect personal privacy and prevent data breaches.
- Traceability : Historical trajectory data is retained for at least one year to facilitate accident investigations.
II. System Management Responsibilities
- Safety Management Department
- Responsible for the overall planning, implementation, and oversight of the personnel positioning system.
- Develop system operating procedures and organize regular training and drills.
- Issuance, retrieval, and permission configuration of reviewer identification cards.
- Information Technology Department
- Responsible for the maintenance and upgrading of system hardware and software.
- Ensure the security of the system network and prevent data tampering or leakage.
- Regularly back up location data to ensure data integrity.
- Production Department
- Ensure that employees wear their location-tracking devices correctly and comply with the system’s usage policies.
- If you detect any equipment malfunction or anomaly, report it promptly and cooperate with the necessary corrective actions.
- Employee Responsibilities
- Wear the positioning device correctly; do not dismantle or damage it without authorization.
- If you detect any equipment malfunctions, report them immediately.
- In coordination with safety inspections and emergency drills.
III. Equipment Management
- Equipment Selection and Installation
- Select positioning devices that comply with national standards (such as UWB and Bluetooth beacons) to ensure that positioning accuracy meets the requirements of the complex environment in chemical plants.
- Deploy positioning base stations more densely in critical areas—such as the reactor zone and the tank farm—to eliminate signal blind spots.
- Equipment Maintenance and Calibration
- Conduct monthly inspections of positioning devices to ensure their proper operation.
- System calibration is performed quarterly to ensure positioning accuracy meets the required specifications.
- Establish an equipment maintenance ledger to document equipment status and repair history.
- Equipment Disposal and Replacement
- Positioning devices that have been in service for more than five years or exhibit a failure rate exceeding 10% shall be scrapped.
- When upgrading equipment, prioritize products that feature more advanced technology and greater stability.
IV. Personnel Location Card Management
- Distribution and Collection
- Upon onboarding, the safety management department shall issue a location‑tracking card and maintain a corresponding record.
- Upon an employee’s departure or transfer to a new position, the location‑tracking card must be returned, and the security management department will revoke the associated access permissions.
- Visitors and contractor personnel must obtain a temporary access badge before entering the plant premises and return it upon departure.
- Usage Guidelines
- The positioning card must be worn in the designated location (e.g., on a work badge or safety helmet) and shall not be obscured or damaged.
- It is strictly prohibited to dismantle, modify, or borrow another person’s positioning card without authorization.
- When the positioning card’s battery level drops below 20%, it must be recharged or have its battery replaced promptly.
- Exception Handling
- Positioning card In case of loss or damage, you must immediately report to the Security Management Department, obtain a replacement card, and pay the associated fee.
- Intentional damage to or unauthorized removal of the positioning card will be subject to disciplinary action, depending on the severity of the offense.
V. Data Management and Privacy Protection
- Data Collection and Storage
- The system automatically collects personnel location data and uploads it to the server in real time.
- Location data is retained for at least one year, and data pertaining to critical areas is retained for three years.
- The servers are deployed within the factory premises, and external internet access is strictly prohibited to prevent data leakage.
- Data Use and Sharing
- Only the safety management department, the production department, and the emergency command center are authorized to access location data.
- Location data may not be used for commercial purposes or disclosed to third parties without authorization.
- During inspections by government regulatory authorities, necessary data support may be provided.
- Privacy Protection
- It is strictly prohibited to monitor employees’ non-working hours activities via location-tracking systems.
- Employees have the right to access their own location records and may request a review if they detect any anomalies.
- System administrators are required to sign a confidentiality agreement, and any violation will result in legal liability.
VI. Emergency Response
- Alarm mechanism
- The system configures an electronic fence that automatically triggers an alarm when personnel enter a hazardous area or remain stationary for an extended period.
- Alarm notifications are pushed to the safety management department, the production department, and the emergency command center.
- Emergency Response
- In the event of an accident, the positioning system swiftly pinpoints the location of trapped individuals to guide rescue operations.
- Regularly conduct emergency response drills to assess the system’s responsiveness and accuracy.
- Post-event analysis
- Following the accident, location data were retrieved to analyze personnel distribution and movement patterns.
- Based on the analysis results, optimize system deployment and emergency response plans.
VII. Training and Drills
- Training Content
- Operating Procedures and Precautions for the Personnel Positioning System.
- Methods for the use and maintenance of positioning devices.
- Emergency response procedures and self-rescue and mutual assistance skills.
- Training frequency
- New employees receive pre-employment training upon onboarding.
- Conduct a full‑staff refresher training session every six months.
- Following system upgrades or functional adjustments, conduct targeted training promptly.
- Emergency drill
- An emergency drill is conducted quarterly, simulating scenarios such as personnel being trapped and equipment malfunctions.
- Following the drill, a summary and evaluation will be conducted to address any shortcomings.
VIII. Assessment and Rewards/Punishments
- Assessment Content
- Equipment integrity rate and data accuracy rate.
- Compliance with the use of location-tracking devices by employees.
- Emergency response speed and effectiveness of handling.
- Incentive measures
- Departments or individuals who have demonstrated outstanding performance in system management and maintenance will be commended.
- Rewards will be granted to those who propose effective improvement suggestions and implement them.
- Penalty measures
- Those who fail to wear the positioning card as required or damage it shall be subject to a warning or a fine.
- Anyone who privately alters location data or discloses personal information shall be held legally accountable.
- In cases where accidents are caused by poor management, the relevant personnel shall be held accountable.
IX. Supplementary Provisions
System Revision
The system shall be revised every two years in accordance with technological advancements and actual needs.
The revised provisions shall take effect upon approval by the Employees’ Congress.
Right of Interpretation
This regulation shall be interpreted by the Safety Management Department of the Chemical Plant.
Effective Date
This system shall take effect from the date of its promulgation.